Learn About Your Car

Are you interested in certification?

Schedule a Demo

Estimates last updated June 18, 2026

2011 Suzuki Equator Ignition Coil Replacement Cost

The average cost for a 2011 Suzuki Equator Ignition Coil Replacement is between $760 and $1,021.

Labor costs are estimated between $171 and $251 while parts are priced between $589 and $771.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.

Ignition Coil Replacement

What is an ignition coil?

Ignition coils send high-voltage electricity to the spark plugs, which is necessary to start the engine. Most cars made in the past three decades have one ignition coil, or coil pack, per cylinder.

How does the ignition coil work?

There are two sets of windings inside each ignition coil. The primary windings have hundreds of turns of heavy wire, while the secondary side contains thousands of turns of fine wire. Power supplied by the battery flows through the primary windings. When your car’s computer decides it’s time to fire that cylinder’s spark plug (or plugs), it cuts the current to the primary windings, causing the energy in them to collapse into the secondary windings. This multiplies the voltage, which is then sent to the spark plug in order to make it fire.

Oil or coolant leaks can damage ignition coils—the leaks need to be repaired along with the ignition coil.

Failing ignition coils can cause the engine to run roughly or a lack of power upon acceleration.The Check Engine Light will often flash when the engine is misfiring—continuing to drive under these conditions can damage the catalytic converter.

Suzuki Ignition Coil Replacement Cost Estimates

The average cost for a Ignition Coil Replacement is between $760 and $1,021 but can vary from car to car.

Suzuki Equator Ignition Coil Replacement Cost by Year

The average cost for a Suzuki Equator Ignition Coil Replacement is between $760 and $1,021 but can vary from car to car.

More RepairPal Resources

Ignition Coil Replacement

Jump to:Commonly associated repairs Related OBD codes Cost estimates by vehicle Cost estimates by year

What is an ignition coil?

Ignition coils send high-voltage electricity to the spark plugs, which is necessary to start the engine. Most cars made in the past three decades have one ignition coil, or coil pack, per cylinder.

How does the ignition coil work?

Oil or coolant leaks can damage ignition coils—the leaks need to be repaired along with the ignition coil.

What are the symptoms related to a bad ignition coil?

A failing ignition coil can create several symptoms:

Check engine light comes on

Engine runs poorly or stall

Increased emissions

Reduced fuel economy

Car won’t start

If the coil is failing, you may hear arcing from under the hood, which sounds like a rubber band snapping. The ignition coil may look burned or white where the terminal connects to the insulated wire.

Can I drive with an ignition coil problem?

If the ignition coil goes bad, the car won't be much fun to drive — it might stall, and will definitely run poorly. Also, the amount of unburned fuel going into the catalytic converter could cause it to fail, adding an expensive repair to your bill. With severe ignition problems, the vehicle should be towed to a repair facility.

How often do ignition coils need to be replaced?

Some carmakers recommend replacing the ignition coils at scheduled intervals; this schedule should be followed to reduce the likelihood of failure. Some coils will last the lifetime of the vehicle, and other may only last 5,000 miles. Most will make it 60,000 miles or more.

How are ignition coil issues diagnosed?

For vehicles that use one coil per spark plug: If the engine misfire is only on one cylinder, the components for only that cylinder should be examined. If the coil is suspected, it will be tested and, if faulty, will be replaced. For older cars, with distributors: One coil will fire multiple spark plugs. If all these plugs are failing, the ignition coil will be suspected and tested.

A failed ignition coil can be the result of failures elsewhere in the ignition system. The ignition wires and spark plugs should be inspected and replaced if necessary.

RepairPal recommendations for ignition coil issues

Proper testing is key — spark plugs, spark plug wires and other components can cause similar symptoms. Some ignition coils are better than others at generating high-voltage electricity for the spark plugs. Purchasing ignition parts that are built to OEM standards or better is recommended. Using inferior parts may lead to a repeated repair.