The average cost for a 2011 Ram 3500 Tailgate Lock Cylinder Replacement is between $133 and $161.
Labor costs are estimated between $61 and $90 while parts are typically priced around $72.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.
Need a repair? Trust our RepairPal Certified network.
With thousands of repair shops to choose from, how do you find one that is honest and fair? We've done the research for you.
More RepairPal Resources
AI can make mistakes. Verify important details.
AI can make mistakes. Verify important details.
What will this cost in Columbus, OH
Tailgate Lock Cylinder Replacement
What is a Tailgate Lock Cylinder?
A tailgate lock cylinder is usually located in the tailgate latch handle assembly. It is used to lock or unlock the tailgate on a truck manually with a key. It may also be integrated into the vehicle's central locking system. Often the lock cylinder will have a sensor attached as part of the Anti Theft system to read the key, ensuring it is being unlocked by the proper key.
How do Tailgate Lock Cylinders work?
The tailgate lock cylinder is "coded" to the vehicle's key and it turns when the key is inserted and rotated, just like any other lock. But inside the tailgate, the lock cylinder moves a lever to enable or disable the latch handle. When the tailgate is locked, the handle is disconnected from the latch linkage. When it is unlocked, the latch handle engages the linkage and allows the tailgate to be opened. On some trucks, the lock cylinder also actuates the rest of the locks in the central locking system through the Body Control Module.
What are the symptoms of a bad Tailgate Lock Cylinder?
Most often, the symptom of a faulty tailgate lock cylinder is that the key will not turn or will not even insert into the hole at all. Sometimes the key gets stuck in one position or another, or it is difficult to remove. Occasionally a key is broken off inside the lock cylinder and cannot be removed. Electrical problems with the locking system are likely caused by the failure of other components.
Can I drive with a bad Tailgate Lock Cylinder?
A bad tailgate lock cylinder is less of a concern for driving and more of an inconvenience, especially if the tailgate is locked shut. A truck can still be driven with a bad lock cylinder. How soon the problem should be corrected is more of a personal concern and need for a tailgate lock. However, if the tailgate lock is connected to the central locking system - if it is activated with a remote key fob - symptoms of a bad lock cylinder could be related to other components, such as a faulty actuator or latch. Because components in the locking system are interrelated, a problem with one lock could affect the other locks.
How often do Tailgate Lock Cylinders need replacement?
The lock cylinders on a vehicle are designed to last the lifetime of the vehicle. But, because today's vehicles are more often locked and unlocked with a remote key fob, with the lock buttons on the door panel, or automatically when shifting into gear, the lock cylinder gets little to no use. This state of disuse often causes a lock cylinder to seize up. The tiny tumblers inside the cylinder can no longer move freely and respond to the key. Most complaints about faulty lock cylinders are caused by this situation.
How are Tailgate Lock Cylinder issues diagnosed?
To diagnose a bad tailgate lock cylinder, a technician will attempt to insert and turn the key. If the key is difficult to insert or does not turn freely, the technician may try to lubricate the cylinder and get it to free up. If this is not possible, the technician will remove the latch handle assembly from the tailgate to access the cylinder, the inside of the latch, and the connecting linkage. The goal is to rule out any other components as the cause of the problem. The lock cylinder may be removed from the latch handle assembly to observe how it operates on its own. If the rest of the system is operating properly, the lock cylinder is replaced.
How are Tailgate Lock Cylinders replaced?
To replace a tailgate lock cylinder, a technician will need to remove the latch handle assembly that houses the cylinder. This may require removal of any panels or closures on the inside of the tailgate, which can present a challenge if an aftermarket protective lining has been applied to the truck bed and tailgate. The lock cylinder is removed from the handle assembly. A new lock cylinder needs to be "coded" by the dealer to fit the key before it is installed.
RepairPal Recommendations for Tailgate Lock Cylinder issues
On today's cars, trucks, and SUVs, it is easy to neglect the lock cylinders on a vehicle, especially the one in the tailgate. But, should the battery die for some reason, a key is the only way to unlock the vehicle. RepairPal recommends that the lock cylinders, whether in the tailgate or in the doors, be operated with the key periodically as part of routine vehicle maintenance. This will help to prevent the cylinders from seizing up and failing prematurely.
What to look out for when dealing with Tailgate Lock Cylinder issues
Many truck owners have a sprayed-on coating, or bed liner, applied to protect the paint finish from abrasion. This coating also covers the inside of the tailgate. On some vehicles, gaining access to the inside of the tailgate or to the mounting hardware for the latch handle is more difficult because of the bed liner. It may be necessary to cut through the coating to remove hardware or closure panels. In these cases, the bedliner will need to be resprayed over the bolts to maintain the original appearance.
Can I replace the Tailgate Lock Cylinder myself?
Replacement of the tailgate lock cylinder can usually be performed by someone with an intermediate level of DIY experience. It will be necessary to have the new lock cylinder "coded" to the key for the vehicle by the dealer or a qualified locksmith.
Repairs Related to Tailgate Lock Cylinder Replacement