Learn About Your Car

Your car, services, and appointments in one place.

Estimates last updated January 28, 2026

Oldsmobile Cutlass Cruiser Power Steering Pump Replacement Cost

The average cost for an Oldsmobile Cutlass Cruiser Power Steering Pump Replacement is between $644 and $706.

Labor costs are estimated between $133 and $195 while parts are typically priced around $511.

This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

For a more accurate estimate based on your location, use our Fair Price Estimator below.

Power Steering Pump Replacement

What is a power steering pump?

The power steering pump pressurizes and circulates power steering fluid through the power steering hydraulic system, allowing the steering wheel to turn with greater ease.

How does the power steering pump work?

Power steering pumps create hydraulic pressure, and a hose transfers the pressure to the steering gear, where it can be used to assist in turning the wheels. Another hose then returns the used fluid to be pressurized. This process happens continuously, and the power steering pump pressurizes fluid any time the engine is running.

What are the symptoms related to a bad power steering pump?

If you have a power steering fluid leak, you'll likely see a puddle of it on the ground under your car. If the fluid level gets too low, the car will get harder to steer, especially at low speeds. The power steering pump may also start making a screeching noise when you turn the steering wheel. » MORE: Signs your power steering pump is going bad

Can I drive with a power steering pump problem?

A vehicle can be driven with leaking power steering components, but you'll need to make sure there's enough fluid for the system to function. If the fluid is leaking fast, have the car towed to a repair shop to prevent damage to the power steering system.

How often do power steering pumps need to be replaced?

In most vehicles, the power steering system will last well over 100,000 miles before any failures occur. Mechanical issues and leaks in the power steering system are usually avoidable if you stick to the maintenance schedule in your owner's manual. But because of the pressure in the system, parts of it will eventually wear out.

Oldsmobile Cutlass Cruiser Power Steering Pump Replacement Cost by Year

The average cost for a Oldsmobile Cutlass Cruiser Power Steering Pump Replacement is between $644 and $706 but can vary from car to car.

1994 Oldsmobile Cutlass Cruiser

$749-$812

1993 Oldsmobile Cutlass Cruiser

$525-$587

1992 Oldsmobile Cutlass Cruiser

$525-$587

1991 Oldsmobile Cutlass Cruiser

$525-$587

1990 Oldsmobile Cutlass Cruiser

$553-$610

Oldsmobile Power Steering Pump Replacement Cost Estimates

The average cost for a Power Steering Pump Replacement is between $644 and $706 but can vary from car to car.

Oldsmobile Alero

$420-$558

Oldsmobile Cutlass Supreme

$579-$728

Oldsmobile Cutlass Ciera

Oldsmobile Silhouette

Power Steering Pump Replacement

Jump to:Cost estimates by year Cost estimates by vehicle

What is a power steering pump?

The power steering pump pressurizes and circulates power steering fluid through the power steering hydraulic system, allowing the steering wheel to turn with greater ease.

How does the power steering pump work?

What are the symptoms related to a bad power steering pump?

Can I drive with a power steering pump problem?

How often do power steering pumps need to be replaced?

How are power steering pump issues diagnosed?

Most power steering issues will create the same symptoms, so it can be difficult to diagnose one part without examining the whole system. When symptoms emerge, the power steering fluid is inspected and topped off, and the condition and tension of the power steering pump belt is noted. The system may need to be bled of air before diagnosis. Any leaks will become very obvious at that time, and noise from the pump would indicated that it has failed mechanically.

How is a power steering pump replaced?

To replace the pump, the power steering fluid will first need to be drained. The serpentine or power steering belt will be removed, the hoses will be taken off, and the pump will be unbolted from the engine block. A new pump will then be installed, the lines attached, the belt reinstalled, and the fluid refilled. The system will be bled of air and checked to ensure a complete repair.

RepairPal recommendations for power steering pump issues

When having the power steering pump replaced, the power steering fluid hoses and related components should be inspected. Any debris from the pump may have worked into the steering system, requiring replacement of the hoses, and at least a flushing of the steering rack or gearbox. It's also smart to replace the plastic fluid reservoir at the same time.

What to look out for when dealing with power steering pump issues

Power steering components are subject to high pressure, heat and speeds. Using parts that are built to meet or exceed OEM standards will help ensure the longevity of the system. Inferior parts tend to lead to repeated replacement.

Can I replace the power steering pump myself?

Replacing a power steering pump can be a good repair for the advanced DIYer — but it involves a lot of work. You'll need to drain and refill the power steering system, and bleed the system to purge any trapped air. A torque wrench is usually necessary, as the brass washers must be tightened to specification to prevent leaks. If the power steering pump mounting bolts are integrated into other components, requiring extensive disassembly, consider letting a certified technician handle this job to prevent damage to the engine.