Your car, services, and appointments in one place.
2012 Mitsubishi Eclipse Balance Shaft Belt Tensioner Replacement Cost Estimate
Balance Shaft Belt Tensioner Replacement Cost
Estimates last updated June 18, 2026
2012 Mitsubishi Eclipse Balance Shaft Belt Tensioner Replacement Cost
The average cost for a 2012 Mitsubishi Eclipse Balance Shaft Belt Tensioner Replacement is between $361 and $486.
Labor costs are estimated between $268 and $394 while parts are typically priced around $93.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.
Need a repair? Trust our RepairPal Certified network.
With thousands of repair shops to choose from, how do you find one that is honest and fair? We've done the research for you.
More RepairPal Resources
What will this cost in Columbus, OH
Balance Shaft Belt Tensioner Replacement
What is a Balance Shaft Belt Tensioner?
The balance shaft belt tensioner, as the name implies, provides tension to the balance shaft belt to ensure total contact between the teeth on the belt and the teeth on the balance shaft and crankshaft timing gears. With the appropriate amount of tension from the belt tensioner, the belt and gears will remain aligned so the balance shaft remains properly timed to the engine.
How do Balance Shaft Belt Tensioners work?
As the balance shaft belt is installed this balance shaft belt tensioner pulley is tightened to manufacturer specifications, and that places the proper amount of tension on the belt. It is bolted through the center into the engine, and the smooth side of the balance shaft belt rests tightly against the pulley as it constantly rotates.
What are the symptoms of a bad Balance Shaft Belt Tensioner?
If the balance shaft belt tensioner fails, there will be a very audible chirping noise from the front of the engine. This is because the tensioner bearing is no longer smooth. If it is not changed immediately, the engine will being running roughly, and vibration will be evident throughout the vehicle. As a worst-case scenario, internal engine damage may occur due to slippage or breakage of the balance shaft belt. The check engine light will illuminate on the dashboard in the event of total failure or breakage of the balance shaft belt.
Can I drive with a bad Balance Shaft Belt Tensioner?
It is not recommended to drive a vehicle suspected of timing component damage, and the balance shaft belt and tensioner are responsible for the timing of the balance shaft to the engine. If the vehicle will run, operating the vehicle may result in damage or total failure to the engine.
How often do Balance Shaft Belt Tensioners need replacement?
balance shaft belt tensioner pulleys are replaced during a balance shaft belt replacement service, either as preventive maintenance, or due to suspected failure. This means the average balance shaft belt tensioner replacement occurs between 60,000 and 105,000 miles, depending on the manufacturer specified balance shaft belt service interval.
How are Balance Shaft Belt Tensioner issues diagnosed?
Diagnosis of a failed or failing tensioner requires removal of many components, and hands on inspection of the balance shaft belt tensioner. If the servicing technician finds the pulley is loose or damaged in any way, they will recommend immediate replacement of, at minimum, the balance shaft belt and balance shaft belt tensioner pulley.
How are Balance Shaft Belt Tensioners replaced?
At a minimum, replacement involves removal of the timing cover, balance shaft belt tensioner, balance shaft belt, and the balance shaft belt pulley. The balance shaft belt tensioner is typically attached by one bolt, but installation requires the proper amount of tension to be applied to the balance shaft belt and idler pulley retaining bolt. Once all components are replaced, the timing components can be installed onto the engine, and the engine will be tested for proper operation and balance shaft timing before additional components are replaced.
RepairPal Recommendations for Balance Shaft Belt Tensioner issues
Since this service requires removal of the balance shaft belt and timing cover, it is recommended to replace the timing belt, water pump and possibly front seals at the same time, unless they have been recently serviced. This is much more cost effective than returning for the same service after a partial service interval has elapsed.
What to look out for when dealing with Balance Shaft Belt Tensioner issues
It may be necessary for the motor mounts to be removed from the vehicle, as well as engine cooling fans, the radiator, and all engine accessories. This may include components like the alternator, A/C compressor, mounting brackets, coolant or fuel lines, and any other component that interfere with access to the timing cover or front cover.
Can I replace the Balance Shaft Belt Tensioner myself?
Since balance shaft belt tensioner replacement necessitates the removal of timing components, it is not recommended for the DIYer to attempt this task. A thorough knowledge of internal engine components, engine timing, accessory systems, and several specialty tools are required to properly perform this repair.
Get a RepairPal Fair Price Estimate® for your 2012 Mitsubishi Eclipse.
Our Fair Price Estimate will help you avoid overpaying based on your car, needed service, and labor rates in your area.
Mitsubishi Balance Shaft Belt Tensioner Replacement Cost Estimates
The average cost for a Balance Shaft Belt Tensioner Replacement is between $361 and $486 but can vary from car to car.