Estimates last updated October 16, 2025

1997 Mercury Mountaineer Tire Pressure Monitor Lamp Diagnosis Cost

The average cost for a 1997 Mercury Mountaineer Tire Pressure Monitor Lamp Diagnosis is between $122 and $179.

Labor costs are estimated between $122 and $179.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

Tire Pressure Monitor Lamp Diagnosis

What is Tire Pressure Monitoring Lamp Diagnosis?

Vehicles with the added benefit of tire pressure monitoring are able to tell the driver when the air pressure in a tire is too high, too low, and, in some vehicles, what the exact tire pressure is at all times. Manufacturers use sensors in the wheels to communicate wirelessly to the tire pressure monitoring system control module, and this module will illuminate the warning light when there is a tire air pressure issue. When the light comes on, diagnosis with a scan tool is only required if the air pressure is correct at the time the warning lamp appears while driving.

How does the TPMS work?

The tire pressure monitoring system (TPMS) control module will receive information from the tire pressure monitoring sensors at all times the vehicle is on. In most vehicles, the only purpose of the TPMS control module is to illuminate the TPMS warning light when the tire is under or overinflated. This makes diagnosing the system very easy with the right diagnostic scan tool.

When do I need Tire Pressure Monitor Lamp Diagnosis?

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

Can I drive with the TPMS warning light on?

The TPMS warning light comes on all the time, but that does not mean it should be ignored. The light is designed to give you fair warning of deflation before damage is done to the tire or wheel, and to prevent unsafe driving when a tire goes flat. Anytime the light comes on, pull over and check the air pressure immediately when it is safe to do so.

Mercury Tire Pressure Monitor Lamp Diagnosis Cost Estimates

The average cost for a Tire Pressure Monitor Lamp Diagnosis is between $122 and $179 but can vary from car to car.

Mercury Grand Marquis

Mercury Mountaineer Tire Pressure Monitor Lamp Diagnosis Cost by Year

The average cost for a Mercury Mountaineer Tire Pressure Monitor Lamp Diagnosis is between $122 and $179 but can vary from car to car.

2010 Mercury Mountaineer

$122-$179

2009 Mercury Mountaineer

$122-$179

2008 Mercury Mountaineer

$122-$179

2007 Mercury Mountaineer

$122-$179

2006 Mercury Mountaineer

$122-$179

Tire Pressure Monitor Lamp Diagnosis

Jump to:Commonly associated repairs Cost estimates by vehicle Cost estimates by year

What is Tire Pressure Monitoring Lamp Diagnosis?

How does the TPMS work?

When do I need Tire Pressure Monitor Lamp Diagnosis?

Can I drive with the TPMS warning light on?

How often does the TPMS lamp require diagnosis?

As stated before, this occurs all of the time. In fact, this may be the most commonly seen warning light on the instrument cluster, but that does not mean it needs to be diagnosed. In fact, in nearly all cases the light will go off a few minutes after adjusting the air pressure in all four or six tires. This leaves a relatively small number of times where the TPMS warning lamp must be diagnosed to identify why it will not come on or turn off. Again, this is common, especially if the roads local to the vehicle have potholes and bumps.

How is the TPMS lamp diagnosed?

After checking the air pressure, the technician will need to connect a diagnostic scan tool to test the wheel sensors first. In some vehicles, the sensors will not set an OBD-II code directing the technician to the faulty tire pressure sensor, and those must be checked manually. The tires can be inflated and deflated one at a time, and the sensor that does not register the change is faulty. However, if sensors fail to communicate with the control module or the control module is unresponsive, the control module will be diagnosed separately.

RepairPal Recommendations for TPMS system issues

We always recommend contacting the repair center where the tires were last installed. Although the tire pressure sensors are fairly inexpensive, it is best to use the warranty if purchased.

What to look out for when dealing with TPMS lamp issues

It is essential to understanding where to locate the tire pressure information for the vehicle you drive in the event that you need to check, inflate, or deflate the tires. The information is likely posted on the driver door frame, inside the fuel tank lid, or in the owner's manual. Inflating a tire to the maximum allowable limit printed on the sidewall will be incorrectly overinflated every time.

Can I diagnose the TPMS warning lamp myself?

Checking the air pressure in the tires is something anyone can do, and this solves the majority of issues arising with the TPMS warning lamp However, if a tire goes flat without the TPMS warning light being displayed, or the warning lamp does not turn off with correct pressure, diagnosis will need to be performed with a professional scanner.