Estimates last updated October 16, 2025

1997 Mercury Mountaineer Powertrain Control System Diagnosis & Testing Cost

The average cost for a 1997 Mercury Mountaineer Powertrain Control System Diagnosis & Testing is between $61 and $90.

Labor costs are estimated between $61 and $90.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

Powertrain Control System Diagnosis & Testing

What is a check engine light?

The check engine light will illuminate on your dashboard when your onboard computer system has identified an issue that could cause an increase in emissions from the exhaust system.

Powertrain Control System Diagnosis & Testing

How does a check engine light work?

The computer that operates the engine takes in data from numerous sensors and controls the fuel delivery and ignition system based on that data. The computer monitors the signals coming in and going out. When it measures an anomaly it will register this as a fault, store a diagnostic trouble code in the computer, and turn on the Check Engine Light.

What are the symptoms associated with a check engine light?

When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.

Can I drive with the check engine light on?

Whenever the Check Engine Light is on there's a possibility the engine is emitting excessive emissions out the tailpipe. In extreme cases other parts in the system can be damaged, like the Catalytic Converter or Oxygen Sensor. Whether you experience performance problems or not, a flashing CEL indicates that an engine misfire has occurred. When this happens you should pull off the road and not drive the vehicle as this will damage the Catalytic Converter, which can cost over $1000 to replace. Get this fixed by a RepairPal Certified Shop

Mercury Powertrain Control System Diagnosis & Testing Cost Estimates

The average cost for a Powertrain Control System Diagnosis & Testing is between $61 and $90 but can vary from car to car.

Mercury Grand Marquis

Mercury Mountaineer Powertrain Control System Diagnosis & Testing Cost by Year

The average cost for a Mercury Mountaineer Powertrain Control System Diagnosis & Testing is between $61 and $90 but can vary from car to car.

2010 Mercury Mountaineer

$61-$90

2009 Mercury Mountaineer

$61-$90

2008 Mercury Mountaineer

$61-$90

2007 Mercury Mountaineer

$61-$90

2006 Mercury Mountaineer

$61-$90

Powertrain Control System Diagnosis & Testing

Jump to:Cost estimates by vehicle Cost estimates by year

What is a check engine light?

The check engine light will illuminate on your dashboard when your onboard computer system has identified an issue that could cause an increase in emissions from the exhaust system.

How does a check engine light work?

What are the symptoms associated with a check engine light?

Can I drive with the check engine light on?

How often does the check engine light come on?

The Check Engine Light can come on at anytime and at any vehicle age. It is not uncommon for this to happen while the car is under warranty and at anytime during the remainder of the vehicle's life.

How is a check engine light diagnosed?

A professional will connect a diagnostic scan tool to read out the diagnostic trouble codes stored in the vehicle. They should check every system in the vehicle as the light can be illuminated from other things like the transmission or ABS system. There can be numerous codes stored in the computer for days, weeks or months so it's important to identify the code that is causing the light to illuminate. The computer can store additional data like when the code was set, how many times it was set, and the sensor reading at the time it was set. All this info is used to start the diagnostic process. Can manufacturers release information called Technical Service Bulletins that may shine a light on why a code was set. Professional mechanics will always check these before diving too deep into any issues that caused the light to come on. Depending on why the code came on, mechanics will test out the sensors or other items like the injectors, fuel pump, spark plugs or just about any other part on the engine. Once a failed part is identified the mechanic replaces the part, resets the trouble codes then drives the car to verify the issue has been resolved.

RepairPal Recommendations for a check engine light

We recommend that you never replace a part based on only the diagnostic trouble code from the engine computer. Have the system diagnosed by a professional to ensure you don't spend money on parts that aren't needed. When a shop works on your car for this issue ask them to record all the codes stored in the vehicle on the repair order. If they are having trouble diagnosing an issue, ask them if they've checked the Technical Service Bulletins as these can help to identify really hard problems.

Things to be aware of with a check engine light diagnosis

There's a common misconception that mechanics can plug a computer into your car and tell you what's wrong. This is only partially true. The data retrieved from the computers give them clues about what system has registered a malfunction, but not what part has failed. You know how sometimes a light in your house stops working, but it can be the bulb, light socket, wiring, switch or just a power outage? Cars are similar...you may get a diagnostic trouble code for the oxygen sensor but the sensor can be OK and the code is set by a bad connector, wiring, exhaust leak or another sensor in the system. This is why it's crucial that a mechanic performs a proper diagnosis to determine exactly why the light was illuminated. Otherwise they will likely replace unneeded parts before identifying the real issue.

Can I diagnose a check engine light myself?

Many novice DIY'ers attempt to address this issue by purchasing a diagnostic code reader and replacing the part identified by the code. We receive an abundance of stories where consumers replace multiple parts at a guess without resolving their issue. In some cases they are successful but when it goes wrong it can get expensive very quickly. For these reasons we recommend leaving check engine light diagnosis to professionals.