Learn About Your Car

Exhaust Muffler Replacement Cost

Estimates last updated September 3, 2026

2001 Mercedes-Benz SLK320 Exhaust Muffler Replacement Cost

The average cost for a 2001 Mercedes-Benz SLK320 Exhaust Muffler Replacement is between $851 and $920.

Labor costs are estimated between $146 and $215 while parts are typically priced around $705.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.

Exhaust Muffler Replacement

What is a muffler?

The muffler is the last step for exhaust gas on the way out of the exhaust system. Mufflers reduce the noise created by exhaust gases emitted from the engine to make sure the vehicle drives quietly.

How does the muffler work?

The muffler uses several sound deadening chambers that absorb vibrations as the exhaust gas passes through this forced maze. After passing through multiple chambers and baffles, the exhaust noise is quieted down to the designed level.

A muffler can deteriorate very slowly over time. As a result, the driver may not notice the increased noise from a failing muffler. We recommend haveing the exhaust system checked yearly for potential concerns.

Need a repair? Trust our RepairPal Certified network.

With thousands of repair shops to choose from, how do you find one that is honest and fair? We've done the research for you.

Mercedes-Benz Exhaust Muffler Replacement Cost Estimates

The average cost for a Exhaust Muffler Replacement is between $851 and $920 but can vary from car to car.

Mercedes-Benz SLK320 Exhaust Muffler Replacement Cost by Year

The average cost for a Mercedes-Benz SLK320 Exhaust Muffler Replacement is between $851 and $920 but can vary from car to car.

2004 Mercedes-Benz SLK320

$1,010-$1,153

2003 Mercedes-Benz SLK320

$1,010-$1,153

2002 Mercedes-Benz SLK320

$851-$920

2001 Mercedes-Benz SLK320

$851-$920

More RepairPal Resources

Exhaust Muffler Replacement

Jump to:Cost estimates by vehicle Cost estimates by year

What is a muffler?

The muffler is the last step for exhaust gas on the way out of the exhaust system. Mufflers reduce the noise created by exhaust gases emitted from the engine to make sure the vehicle drives quietly.

How does the muffler work?

What are the symptoms related to a bad muffler?

When the muffler has become sufficiently corroded it will no longer muffle the exhaust noise properly. The muffler brackets or rubber hangers can also break, allowing it to swing underneath the vehicle and hit the undercarriage. Some high end vehicles have vacuum or electronically actuated flaps that adjust the noise level, and when faulty can cause rattling noises from the tailpipe, or excess noise when the flaps are stuck open. In the rare case the muffler is clogged, they engine may fail to start, stall, or run roughly due to excess back-pressure.

Can I drive with a muffler problem?

Driving a vehicle with a hole in the muffler will generally not cause any harm. The engine will not record any data concerning the muffler, because the oxygen sensor is located before the resonator and muffler. If the muffler is clogged, the vehicle will most likely not be able to start, or stay running.

How often do mufflers need to be replaced?

The number one cause of muffler failure is corrosion from road salt or other debris. Collisions can also damage mufflers when the vehicle is rear ended. There is no recommended replacement interval for mufflers, and they often last the life of the vehicle.

How are muffler issues diagnosed?

Diagnosis of a muffler issue is typically visual in nature. The condition of the muffler, exhaust pipe, and hangars will be inspected, and any corrosion or excessive wear will necessitate replacement. Furthermore, if the engine will not start, and no air comes from the exhaust pipe, the muffler may be disconnected to locate the clog. If the muffler is clogged, it will be replaced.

How is a muffler replaced?

Replacement varies with vehicle type. Many factory mufflers only require the rear most section to be unbolted and replaced with new. Because of the location, usage of penetrating chemicals and heat may be required to free the corrosion on the fasteners. If installing an aftermarket muffler with different flanges, cutting and welding of the original exhaust pipe may be necessary to fit the new one.

The entire exhaust system should be inspected and repaired as necessary if the muffler is being replaced.

Stainless Steel exhaust system components may cost a bit more but can last much longer than the standard variety.