Learn About Your Car

Estimates last updated January 1, 1970

Mercedes-Benz 560SEC Suspension Control Arm Bushings Replacement Cost

The average cost for a Mercedes-Benz 560SEC Suspension Control Arm Bushings Replacement is between $1,131 and $1,211.

Labor costs are estimated between $171 and $251 while parts are typically priced around $960.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.

AI can make mistakes. Verify important details.

Suspension Control Arm Bushings Replacement

What are control arm bushings?

The control arm bushings are a component of the control arm, which lets the wheel travel up and down over bumps. The bushing in particular let the control arm pivot.

Suspension Control Arm Bushings Replacement

How do control arm bushings work?

Control arm bushings are found between the control arm and the body or suspension subframe. The bushings help distribute impact force and absorb vibration.

What are the symptoms related to a bad control arm bushing?

If the bushings are worn out, the suspension will make a squeaking sound when going over bumps. If they are severely worn, a knocking sound may be heard as the control arm makes metal-to-metal contact with the bushing bracket. With severely worn bushings, tire wear may be uneven and the vehicle may pull to one side or wander.

Need a repair? Trust our RepairPal Certified network.

With thousands of repair shops to choose from, how do you find one that is honest and fair? We've done the research for you.

Mercedes-Benz 560SEC Suspension Control Arm Bushings Replacement Cost by Year

The average cost for a Mercedes-Benz 560SEC Suspension Control Arm Bushings Replacement is between $1,131 and $1,211 but can vary from car to car.

1991 Mercedes-Benz 560SEC

$1,131-$1,211

1990 Mercedes-Benz 560SEC

$1,131-$1,211

Mercedes-Benz Suspension Control Arm Bushings Replacement Cost Estimates

The average cost for a Suspension Control Arm Bushings Replacement is between $1,131 and $1,211 but can vary from car to car.

More RepairPal Resources

AI can make mistakes. Verify important details.

Mercedes-Benz 560SEC Suspension Control Arm Bushings Replacement Cost by Year

The average cost for a Mercedes-Benz 560SEC Suspension Control Arm Bushings Replacement is between $1,131 and $1,211 but can vary from car to car.

1991 Mercedes-Benz 560SEC

$1,131-$1,211

1990 Mercedes-Benz 560SEC

$1,131-$1,211

Suspension Control Arm Bushings Replacement

Jump to:Cost estimates by year Cost estimates by vehicle

What are control arm bushings?

The control arm bushings are a component of the control arm, which lets the wheel travel up and down over bumps. The bushing in particular let the control arm pivot.

How do control arm bushings work?

Control arm bushings are found between the control arm and the body or suspension subframe. The bushings help distribute impact force and absorb vibration.

What are the symptoms related to a bad control arm bushing?

Can I drive with a control arm bushing problem?

If the control arm bushings are worn, the result will be an annoying squeak when the car goes over bumps. In this case, the car can be driven. But if the bushings wear out considerably, metal-on-metal contact may occur and cause further suspension damage and inconsistent handling. This requires a repair.

How often do control arm bushings need to be replaced?

While there's no set schedule, the bushings may wear out and need to be replaced as a vehicle approaches 100,000 miles. Driving aggressively or over rough roads can decrease the lifespan of the control arm bushings. On some vehicle models, the bushings are permanently installed in the control arms. If the bushings wear out, the entire arm will need to be replaced.

How are control arm bushing issues diagnosed?

A technician may diagnose a worn lower control arm bushing during a test drive of the vehicle. The condition may also present itself during a bounce test, where the technician will press down firmly on one corner of the front end of the vehicle to bounce the suspension and pivot the control arms. A severely worn control arm bushing may also show up during a four-wheel suspension alignment since the control arm determines the position and angle of the wheel.

How is a control arm bushing replaced?

The car must be lifted, and the wheel and tire removed. The lower control arm must be disconnected from the lower ball joint and the vehicle frame or body. An upper control arm is disconnected from the strut tower on the body and from the top of the steering knuckle. It's common to replace related components, such as ball joints, tie rod ends and sway bar links, at the same time a control arm or bushing is replaced.

Other considerations

On many vehicles, the control arm bushings are not replaced separately and may need to be replaced along with the control arm.

Other considerations

A four-wheel alignment will be needed after performing this type of suspension repair.

RepairPal recommendations for control arm bushing issues

RepairPal recommends inspecting (and replacing if necessary) the ball joint at the same time that the control arm bushings are replaced. Since the control arm determines the position of the wheel and tire, a wheel alignment is also recommended.