Your car, services, and appointments in one place.
Need a repair? Trust our RepairPal Certified network.
With thousands of repair shops to choose from, how do you find one that is honest and fair? We've done the research for you.
Oops! We got lost!
Your location cannot be detected. Please enter your zipcode for nearby shops.
More RepairPal Resources
What will this cost in Columbus, OH
AC Compressor Replacement
What is an AC compressor?
The air conditioning compressor moves refrigerant through the AC system and compresses low-pressure refrigerant to create high-pressure refrigerant.
How does the AC compressor work?
The serpentine belt or drive belt runs the AC compressor, allowing it to pressurize refrigerant and pass it on through the system. The compressor also uses check valves and other moving parts that allow refrigerant to flow in one direction.
AC compressors may need to be replaced if they are found to be leaking oil and/or refrigerant.
Failing AC compressors that make unusually loud noises while operating should be addressed before they cause damage to other parts in the AC system.
What are the symptoms related to a bad AC compressor?
When the compressor fails, the most common symptom is warm air from the vents. A squealing or grinding noise may also be heard from the compressor in the event of mechanical failure.
2010 Jeep Wrangler AC Compressor Replacement Cost
The average cost for a 2010 Jeep Wrangler AC Compressor Replacement is between $922 and $1,195.
Labor costs are estimated between $171 and $251 while parts are priced between $751 and $944.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.
Can I drive with an AC compressor problem?
In most cases, a vehicle with a bad air conditioning compressor is safe to drive.
However, if grinding is heard from the compressor pulley, bearing failure may occur, causing the serpentine belt to come off. If this occurs, the battery warning light will illuminate, and the engine will stall due to lack of electrical power.
How often do AC compressors need to be replaced?
Failure of the air conditioning compressor is common because moisture or clogs in the system will place stress on the compressor.
Compressor clutch failure is much more common on older vehicles. In general, AC compressors tend to fail after 60,000 to 70,000 miles, but that time may vary depending on use, demand and operating conditions.
How are AC compressor issues diagnosed?
Diagnosing the compressor requires advanced knowledge of air conditioning systems. AC systems should be repaired by a technician with proper training and certification. Professional-grade equipment is used to read the pressure, and the technician must rely on hours of classroom and training to diagnose the faulty part.
"Stop leak" compounds are not recommended, as they are a temporary solution and can damage AC components, resulting in expensive repairs.
How is an AC compressor replaced?
Replacement of most air conditioning components requires the complete evacuation of the air conditioning system. The serpentine belt, refrigerant lines and electrical connectors must be removed. Finally, the mounting bolts and hardware must be removed to let the compressor come free from the engine.
A new compressor will then be installed, all parts will be put back in place, and the AC system will be recharged with refrigerant.
Get a RepairPal Fair Price Estimate® for your 2010 Jeep Wrangler.
Our Fair Price Estimate will help you avoid overpaying based on your car, needed service, and labor rates in your area.
