Close
Heater Hose Replacement

Hyundai Veracruz Heater Hose Replacement Cost

The average cost for a Hyundai Veracruz Heater Hose Replacement is between $132 and $184. Labor costs are estimated between $88 and $111 while parts are priced between $44 and $73. Estimate does not include taxes and fees.

How Much Does a Heater Hose Replacement Cost?

Heater Hose Replacement Service and Cost

Heater Hose Replacement
What is a heater hose?

Heater hoses carry engine coolant from the engine to the heater core. There is one inlet hose, and one outlet hose. On older vehicles, the inlet hose may be split into two segments, separated by a heater control valve.

How does the heater hose work?

All engine cooling system hoses work the same way. They are pressed onto a connector at both ends, and either clamped, or sealed with an O-ring type seal. This provides a watertight seal between the two components being connected.

What are the symptoms related to a bad heater hose?

A failing heater hose may cause the vehicle to smell of engine coolant under the hood. If coolant runs onto the heater core inlet or outlet, the cabin could begin to smell of coolant and mildew. Also, the engine may being to run increasingly warmer until the vehicle is repaired. Coolant may leak onto the engine, firewall, and ground, as a defective hose may swell and burst. The worst-case scenario is engine overheating, and possible cylinder head gasket failure.

Can I drive with a heater hose problem?

If the heater control valve is leaking, it is not advised to drive the vehicle as overheating can result from any coolant leak. In this situation, towing the vehicle to a repair facility is the best course of action. When the heater control valve is simply unresponsive, it will not affect drivability in any way, but passenger comfort may be negatively affected.

How often do heater hoses need to be replaced?

Hoses are considered “wear and tear” items, and are expected to be replaced at least once over the life of the vehicle. They tend to fail more quickly if the cooling system is not properly maintained according to the manufacturer's’ scheduled maintenance intervals.

Heater Hose Replacement Repair Information

How are heater hose issues diagnosed?

Heater hoses must be replaced when, at any position on the hose, there is an engine coolant leak or obvious swelling. Also, replacement will be recommended if the hoses are cracked, or worn down by prolonged contact with warm or vibrating engine components.

How is a heater hose replaced?

The coolant is drained from the engine in preparation for servicing the engine cooling system. Clamps will be removed from the ends of the hoses, and the hose will be removed from the heater core and engine. The inlet and outlet flanges on the heater core and engine are cleaned in preparation for installation of the new hoses.

RepairPal Recommendations for heater hose issues

If the vehicle is equipped with a heater control valve, it may be a wise choice to replace it as preventive maintenance. If the heater hose is swelling, the hood should be left closed until the engine is cool. A bursting hose can lead to severe scalding.

Can I replace the heater hose myself?

Yes, heater hose replacement is an excellent DIY project. The informed DIYer more than likely has the experience and know-how to change hoses, belts, and several other maintenance items, without causing damage, or injury.

Most Common Hyundai Veracruz Repairs

Parts
Labor
Average
Parts
Labor
Average