1999 GMC C2500 Suburban Transmission Leak Inspection Cost

Automatic transmissions use the force supplied by the engine to pump pressurized automatic transmission fluid through many components. As the pressure increases or decreases, different clutches or bands will get activated, and these determine which gear your car is in. The higher the gear, the easier it will be for your car to go faster.

If your transmission is leaking, it will typically result in an oil puddle on the pavement under your car. Automatic transmission fluid is typically colored red or green. You should take your vehicle in for a transmission inspection as soon as you notice a leak. If you don't see it in time or ignore it, you may eventually notice the engine revving when you're not accelerating the vehicle — this is called transmission slipping, and can happen when your car is low on transmission fluid.

Continuing driving with a transmission fluid leak is not recommended, as the leak may become worse while driving and it will be impossible to tell how much fluid you lose while in motion. For small leaks or seepage, the vehicle may be driven to the repair facility. However, a car with a moderate to large leak should not be driven. In addition to pouring transmission fluid on the ground, the vehicle may suffer transmission failure from lack of lubrication, also called oil starvation. Get this fixed by a RepairPal Certified Shop

Automatic transmission leaks are most common in high-mileage transmissions in poor condition due to neglected maintenance. Performing factory maintenance on schedule is the best way to help prevent transmission failure. The transmission oil pan gasket is the most common leak to find on a transmission, and this leak is addressed as part of the regular automatic transmission service. Since each manufacturer may set different service intervals, check this page or your owner's manual for information on your vehicle. 

If a transmission leak is suspected, the auto technician will perform an inspection on the transmission to reveal its source. Once the suspected part or parts have been resealed or replaced, the transmission will be inspected again to make sure the leak has stopped. 

Fixing a transmission seal or gasket can be easy, or it can require disassembly of several components or even removing the transmission entirely. This can involve lowering the transmission, removing the transfer case or removing the exhaust to access the driveshaft. If significant fluid loss is noted, a transmission fluid drain and fill is recommended.

We recommend against any products that claim to stop transmission fluid leaks. These products can create a blockage in fluid passages and clog transmission fluid filters. Either of these outcomes can lead to internal damage. You're better off getting the leak repaired the right way.

There are different types of transmission fluids, and they aren't typically interchangeable. Check your owner's manual to find the correct fluid for your transmission. If you add the wrong kind of transmission fluid, the resulting damage could be severe.

Finding and diagnosing transmission leaks can be tricky, but it's something most people can do on their own. Repairing the leak will likely require advanced knowledge and specialty tools. If fixing the leak requires taking apart any or all of the transmission, you should let a mechanic handle it.