Estimates last updated October 16, 2025

2000 Dodge Ram 3500 Van Heater Control Valve Replacement Cost

The average cost for a 2000 Dodge Ram 3500 Van Heater Control Valve Replacement is between $715 and $766.

Labor costs are estimated between $110 and $161 while parts are typically priced around $605.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

Heater Control Valve Replacement

What is a heater control valve?

The heater control valve moderates the amount of heat the cabin gets when the heater is in use. It does this by regulating the amount of hot engine coolant that can enter the heater core. When little or no coolant flows into the heater core, the air from the vents will remain cool. When the valve opens, the air will turn very warm. The valve is regulated by the temperature control dial or slide in the cabin.

What are the symptoms related to a bad heater control valve?

When the heater control valve fails, adjusting the temperature may not change the air temperature at the vents, whether hot or cold. Also, the valve could leak engine coolant, possibly causing the vehicle to overheat.

Can I drive with a heater control valve problem?

If the heater control valve is leaking, you shouldn't drive the vehicle — overheating can result from any coolant leak. In this situation, it's best to have the vehicle towed to a repair shop. If the heater control valve is simply unresponsive, it won't affect drivability in any way. But if you live where the temperature drops below freezing during the winter, you could be in for an uncomfortable ride.

How often do heater control valves need to be replaced?

The original heater control valve for most vehicles should last for about 100,000 miles. Low-quality replacement heater control valves will more than likely fail much more quickly. It's worth noting that not all vehicles are equipped with a heater control valve.

Dodge Heater Control Valve Replacement Cost Estimates

The average cost for a Heater Control Valve Replacement is between $715 and $766 but can vary from car to car.

Dodge Ram 3500 Van Heater Control Valve Replacement Cost by Year

The average cost for a Dodge Ram 3500 Van Heater Control Valve Replacement is between $715 and $766 but can vary from car to car.

2003 Dodge Ram 3500 Van

$715-$766

2002 Dodge Ram 3500 Van

$715-$766

2001 Dodge Ram 3500 Van

$715-$766

2000 Dodge Ram 3500 Van

$715-$766

1999 Dodge Ram 3500 Van

$715-$766

Heater Control Valve Replacement

Jump to:Commonly associated repairs Cost estimates by vehicle Cost estimates by year

What is a heater control valve?

What are the symptoms related to a bad heater control valve?

Can I drive with a heater control valve problem?

How often do heater control valves need to be replaced?

Heater control valves are easily diagnosed by observing whether the valve responds when the temperature selector is adjusted. If there is movement at the valve, but no change in heat, the valve will be removed and inspected. The valve may just be failing to move, or it may be leaking engine coolant. In both cases, the heater control valve is replaced with a high-quality or OEM part.

How is a heater control valve replaced?

The heater control valve is separated from the heater core hoses and control mechanism, which could be a vacuum line or a cable. Then the valve is removed from the firewall, and replaced. Installation is the reverse of removal, and some adjustment may be necessary if you're dealing with a cable-type controller. After the repair, the engine coolant should be filled and bled of air.

RepairPal recommendations for heater control valve issues

This is a good time to check the heater core hoses and replace them if they're leaking or corroded. A thorough cleaning inside the heater hose ends usually helps prevent a leak. It's also a smart time to check the condition of the coolant. There are many brands of heater control valves, and many are universal. Low-quality heater control valves may fail prematurely, leading to the same repair in the future.

Can I replace the heater control valve myself?

This is a great DIY project. It is low in difficulty, and very few tools are required. The novice DIYer should beware of hot engine coolant, and let the vehicle cool before attempting this repair. If you're not familiar with the heating system, or aren't sure if the valve is the cause of the problem, it's best to leave this repair to a professional.