Your car, services, and appointments in one place.
Need a repair? Trust our RepairPal Certified network.
With thousands of repair shops to choose from, how do you find one that is honest and fair? We've done the research for you.
Oops! We got lost!
Your location cannot be detected. Please enter your zipcode for nearby shops.
More RepairPal Resources
What will this cost in Columbus, OH
HVAC Blend Door Actuator Replacement
What is a blend door actuator?
In a vehicle's heating and cooling system, the blend door actuators help control the air temperature from the vents, and direct air to selected vents.
How does the blend door actuator work?
To blow heat into the cabin, the blower motor sends air through the heater core and on through the dash vents. But when heat is not desired, the blend door actuators direct that airflow away from the heater core.
There are also actuators to direct air to the dash vents, floor vents and windshield vents depending which setting is selected.
In addition to improper temperature and/or air flow output from the dash vents, you may also hear a clicking noise from behind the dashboard.
What are the symptoms related to a bad blend door actuator?
The symptoms of a bad blend door actuator include a lack of heat or air conditioning, or failure of air to blow through some or all of the vents. The actuator motors may also make a noise if they've failed, but this isn't always the case.
1998 Dodge Dakota HVAC Blend Door Actuator Replacement Cost
The average cost for a 1998 Dodge Dakota HVAC Blend Door Actuator Replacement is between $369 and $523.
Labor costs are estimated between $329 and $483 while parts are typically priced around $39.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.
Can I drive with a blend door actuator problem?
Driving with a bad blend door actuator may not be comfortable, but it won't hurt the vehicle.
How often do blend door actuators need to be replaced?
Blend door actuators fail frequently on some vehicles, but not in others. So, the rate of failure will depend on the vehicle make, model and year.
How are blend door actuator issues diagnosed?
The technician will test each vent position and temperature range. The amount of air and its temperature will be noted for each setting. If there's no change between settings, the blend doors are a strong possibility.
When these components are suspected, testing the circuit and observing them while they're working are the only ways to test them. The electrical wires or vacuum lines will be inspected to ensure the proper amount of power is being delivered. From there, the parts can be bench tested to pin down the problem.
How is a blend door actuator replaced?
Replacement procedures vary by vehicle. Some actuators will be easy to access, but others will require removing the airbags and dismantling the dashboard or parts of it. Most modern vehicles, especially those with dual climate control features and rear passenger air options, can have several blend doors and actuators.
Related repair information
Depending on the vehicle the replacement of the Blend Door Actuator will require the removal of the dashboard. This adds considerable labor costs, increasing the overall price of this repair.
RepairPal recommendations for blend door actuator issues
We don't recommend using DIY universal blend door correction kits, as these kits involve cutting into the HVAC ducts and replacing OEM components with generic components.
Get a RepairPal Fair Price Estimate® for your 1998 Dodge Dakota.
Our Fair Price Estimate will help you avoid overpaying based on your car, needed service, and labor rates in your area.
Dodge HVAC Blend Door Actuator Replacement Cost Estimates
The average cost for a HVAC Blend Door Actuator Replacement is between $369 and $523 but can vary from car to car.
