2013 Chevrolet Malibu HVAC Air Door Actuator Replacement Cost

Some models of vehicles, especially select domestic vehicles, suffer constantly from these failures. The HVAC air door actuators on some models may fail as early as 20,000 or 30,000 miles, while the majority tend to last for years. In fact, the majority of vehicles will never require a replacement air door actuator, but, like other electronic components, this is mostly random aside from those models which frequently experience failures.

HVAC air door actuators are actually, no pun intended, simple to diagnose. A diagnostic scan tool will be connected, and the HVAC control module will be accessed. The air door will be commanded to open and close, and the physical action of the actuator will show whether or not the air door actuator is operating properly. This, however, is not a complete diagnosis. The technician must also take readings at the connector for the actuator to ensure that the proper signal is being sent. After all, the control module or wiring could have failed as well.

Replacement is often the most difficult part of this repair, as diagnostics is often finished in a matter of minutes. In some cases, the actuator can be removed and replaced from the floorboard of the vehicle, by removing the glove compartment tray, or even by removing a small panel on the front or top of the instrument panel (dashboard). In many other cases, much like the heater core or evaporator coil, the actuators and blend doors require the instrument panel to be removed, and the HVAC central housing and ducts separated to complete this repair. This is a very in depth repair that involves very many steps, many hours, and much dismantling of the vehicle in those cases.

In some cases, repairing this deficiency is more costly than the value of the vehicle. If that is the case, it may be of interest to replace the vehicle instead of repairing the vehicle. On the other hand, there are many alternatives to repairing the HVAC air door actuators for many models of vehicles, but these will typically reduce functionality and require seasonal manual changes. We recommend discussing options with your technician before deciding whether or not to repair the vehicle.

The symptoms listed can be replicated by a broken blend door, blockage in the air ducts, or bad sealing foam pads where the blend door seats against. Also, reprogramming or updating software of the HVAC control module may correct issues listed as well. For these reasons, it is important that diagnostics be carried out before the issue is assumed known.

In minor cases where an HVAC air door has failed and is accessible for replacement, this repair is very simple. Most people with a small tool set can replace the blend door in this situation. However, if the instrument panel must be removed, much deconstruction of the vehicle will take place, and the air conditioner may require discharging and recharging before the HVAC system will function properly. In this case, the repair should certainly be left to a professional technician.