Audi e-tron S Sportback Brake Caliper Replacement Cost

The average cost for an Audi e-tron S Sportback Brake Caliper Replacement is between $1,976 and $2,079.

Labor costs are estimated between $220 and $322 while parts are typically priced around $1,757.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.

Brake Caliper Replacement

What is a brake caliper?

Brake calipers squeeze the brake pads against the brake rotor. The clamping force they apply on the brake rotor slows or stops the vehicle.

How does a brake caliper work?

Braking calipers use hydraulic pressure supplied by the brake master cylinder to clamp the brake pads against the rotor. The brake pads fit inside the caliper, so the hydraulic clamping force is transferred to the pads, then the brake rotor, and ultimately the tires.

Brake calipers require replacement when they are leaking fluid or if one or more of the caliper pistons have become stuck.

A failing brake caliper can cause the vehicle to pull to one side when braking.

Need a repair? Trust our RepairPal Certified network.

With thousands of repair shops to choose from, how do you find one that is honest and fair? We've done the research for you.

Audi Brake Caliper Replacement Cost Estimates

The average cost for a Brake Caliper Replacement is between $1,976 and $2,079 but can vary from car to car.

More RepairPal Resources

Brake Caliper Replacement

Jump to:Commonly associated repairs Cost estimates by vehicle

What is a brake caliper?

Brake calipers squeeze the brake pads against the brake rotor. The clamping force they apply on the brake rotor slows or stops the vehicle.

How does a brake caliper work?

Brake calipers require replacement when they are leaking fluid or if one or more of the caliper pistons have become stuck.

A failing brake caliper can cause the vehicle to pull to one side when braking.

What are the symptoms related to a bad brake caliper?

Brake caliper failure occurs in two different ways, and they create different symptoms. The caliper can become stuck, in which case it won't release the brake pads. The seized caliper will cause the vehicle to brake constantly on one side, forcing the car to move toward that side. This pulling will be accompanied by a strong odor from one wheel. Another way calipers fail is by leaking. If the caliper leaks, the brake pedal will feel too easy to push, and will sink all the way to the floor when held. Braking will become less effective the longer this goes on. There may also be brake fluid leaking onto the wheel.

Can I drive with a brake caliper problem?

It is not safe to drive if your car has a braking problem. If there's any sign that the brakes are not performing as they should, have the vehicle towed to a professional mechanic to get them repaired.

How often do brake calipers need to be replaced?

On most vehicles, the brake calipers will never need replacement. When they do fail, it typically happens when the car has at least 125,000 miles on it.

How are brake caliper issues diagnosed?

A mechanic will look for brake pads that are severely worn on one brake caliper, a caliper not providing sufficient clamping force to stop the vehicle, or fluid leaks from the wheel well. The caliper in question will be removed and further inspected.

How is a brake caliper replaced?

With the wheel and tire off, the caliper is disconnected from the brake line, unbolted and removed. The brake pads will be installed in the new caliper, and the rotor will be cleaned of any brake fluid, grease, fingerprints or other contaminants. Once the brake caliper is ready for installation, it's bolted into place, the brake line is reattached, and the entire braking system will be bled of air.

We recommend the brake calipers be replaced in pairs and the brake hydraulic system flushed when calipers are replaced.