Learn About Your Car

Are you interested in certification?

Schedule a Demo

Air Pump Replacement Cost

Estimates last updated August 7, 2026

2020 Audi A8 Quattro Air Pump Replacement Cost

The average cost for a 2020 Audi A8 Quattro Air Pump Replacement is between $506 and $654.

Labor costs are estimated between $317 and $465 while parts are typically priced around $189.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.

Air Pump Replacement

What is an air pump?

The air pump provides fresh air to various locations in the exhaust system, which helps complete the combustion of harmful exhaust gases.

How does the air pump work?

The air pump can be an electrically operated or belt driven pump. The pump sends fresh air to various locations of the exhaust system via an assortment of pipes, hoses, and valves.

Other considerations

When the air pump is malfunctioning, the vehicle may perform normally. However, it may fail an emissions inspection and the Check Engine Light may illuminate with a code set for the secondary air injection system.

What are the symptoms related to a bad air pump?

Need a repair? Trust our RepairPal Certified network.

With thousands of repair shops to choose from, how do you find one that is honest and fair? We've done the research for you.

Audi Air Pump Replacement Cost Estimates

The average cost for a Air Pump Replacement is between $506 and $654 but can vary from car to car.

Audi A8 Quattro Air Pump Replacement Cost by Year

The average cost for a Audi A8 Quattro Air Pump Replacement is between $506 and $654 but can vary from car to car.

More RepairPal Resources

Air Pump Replacement

Jump to:Commonly associated repairs Related OBD codes Cost estimates by vehicle Cost estimates by year

What is an air pump?

The air pump provides fresh air to various locations in the exhaust system, which helps complete the combustion of harmful exhaust gases.

How does the air pump work?

The air pump can be an electrically operated or belt driven pump. The pump sends fresh air to various locations of the exhaust system via an assortment of pipes, hoses, and valves.

Other considerations

What are the symptoms related to a bad air pump?

Can I drive with an air pump problem?

In most cases you should be able to drive a vehicle with an air pump concern. The exception would be a belt driven pump that will no longer turn, this will cause the belt to overheat and break, potentially knocking the other belts off when it breaks. If a belt driven air pump is excessively noise, the vehicle should not be driven. Chances are a noisy pump will stop turning sooner that later, leading to a broken belt.

How often do air pumps need to be replaced?

Under normal conditions and vehicle life, you should not expect to replace an Air Pump. If an air pump has been damaged by water intrusion the cause of the problem must be corrected prior to replacing the pump. A revised intake tube and or baffle may be available. If not, make sure any the vehicle was originally equipped with are properly installed.

How are air pump issues diagnosed?

Illumination of the check engine light would lead to retrieval of a fault code indicating a problem with the Secondary Air Pump. An abnormal noise from the pump would also indicate a problem.

An air injection system trouble code isn't always triggered by a defective air pump. It can also be triggered by a restricted passage or air pipe, a defective check valve, a defective air pump relay, or a wiring problem.

How is an air pump replaced?

Once the belt is removed or the electrical connector is disconnected, the pump is unbolted from its mount and the new pump is installed. If the pump is belt driven, the belt will then be installed and adjusted as necessary (replace the belt if an inspection deems it necessary). With an electric pump, the electrical connector should be checked for any damage and repaired as necessary prior to reconnecting it. Here are the full steps to replace each type of air pump: Electric Air Injection Pump

Disconnect the negative battery terminal
Remove any components that obstruct access to the electric air pump
Disconnect any air hoses and electrical connectors
Remove the fasteners that secure the air pump
Remove the air pump and install the new one
Secure the new air pump with its fasteners
Reconnect all electrical connectors and air hoses
Install any other removed components
Reconnect the negative battery terminal and clear any codes
Perform a Drive Cycle Test Drive to verify the repair

Belt Driven Air Injection Pump

Disconnect the negative battery terminal
Remove any drive belts that block access to the air pump
Disconnect any air hoses and electrical connectors
Loosen the air pump fasteners and remove the air pump
Install the new air pump and secure its fasteners
Reconnect any air hoses and electrical connectors
Install any removed drive belts and reconnect the negative battery terminal
Clear any codes and perform a Drive Cycle Test Drive to verify the repair

When replacing the air pump, be sure to perform a thorough inspection of the air injection components and passages. Always use factory parts and check for any needed software updates for the power train control module (PCM).