The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2016 Dodge Viper, start with the simplest solution: checking the tire pressure in all four tires using a reliable gauge. Ensure that the readings align with the recommended levels found in your owner's manual or on the sticker inside the driver's side door jamb. If the tire pressure is adequate but the warning light persists, the next step is to reset the Tire Pressure Monitoring System (TPMS), which can typically be done by following the instructions in your vehicle's manual. Should the light remain illuminated after resetting, inspect the TPMS sensors for any signs of damage or malfunction, as faulty sensors can trigger the warning. Additionally, look for any visible leaks in the tires that may be causing a drop in pressure; if you discover a leak, it’s important to have it repaired promptly. If these steps do not resolve the issue, consulting a professional mechanic or visiting a Dodge dealership for a comprehensive inspection is advisable. Remember, addressing the TPMS warning light is crucial for your safety and the longevity of your tires.
When the tire pressure warning light remains on in a 2016 Dodge Viper, it signals a need for immediate attention to ensure safe driving conditions. The most prevalent cause is low tire pressure, which can be easily remedied by checking and inflating the tires to the recommended levels. If the tire pressure is adequate, the issue may stem from a faulty tire pressure sensor that might require replacement. Additionally, the sensors could be out of calibration, necessitating a recalibration process that can be performed by a professional mechanic. It's also important to consider potential electrical issues within the tire pressure monitoring system, as faulty wiring or connections can lead to the warning light being triggered. Lastly, performing a system reset through the vehicle's onboard computer can sometimes clear the warning light. By methodically investigating these common issues, you can effectively troubleshoot and resolve the tire pressure warning light problem in your Dodge Viper, ensuring both safety and performance.
Addressing the tire pressure warning light on a 2016 Dodge Viper that remains illuminated is of utmost urgency due to several critical factors. First and foremost, low tire pressure can severely compromise the vehicle's handling and braking capabilities, significantly increasing the risk of accidents, particularly at high speeds or during emergency maneuvers. Additionally, neglecting this warning can lead to uneven tire wear, which not only shortens the lifespan of your tires but also raises the likelihood of a dangerous blowout while driving. Furthermore, underinflated tires can negatively impact fuel efficiency, leading to increased fuel costs over time. Lastly, the persistent warning light may indicate a malfunction within the Tire Pressure Monitoring System (TPMS), necessitating repairs to ensure accurate tire pressure readings. Therefore, it is essential to promptly investigate and resolve any issues related to the tire pressure warning light to maintain safety, optimize vehicle performance, and avoid costly repairs down the line.
See what others are asking about their Dodge Viper. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Dodge Viper drivers like you.
