2010 Chrysler Town & Country Is Leaking Oil

Discovering the Causes of Oil Leaks in Your 2010 Chrysler Town & Country and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
80% chance it's the
Oil System Components
0%
20% chance it's the
Engine Gaskets
The most common reasons a 2010 Chrysler Town & Country is leaking oil are oil system component failure and leaking engine gaskets.
  • Oil System Components: A worn or damaged oil pump or filter can lead to low oil pressure, resulting in inadequate lubrication and potential engine damage.
  • Engine Gaskets: A worn or damaged engine gasket can lead to oil or coolant leaks, resulting in engine overheating or loss of lubrication.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2010 Chrysler Town & Country is leaking oil?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Oil pans don't wear out or break like other parts, they generally only need to be replaced because of external damage from an accident or an improperly tightened drain plug. The main symptom you will experience is an oil leak underneath the engine of your car. The oil that leaks from a damaged oil pan will range from dark brown to dark black. If the leak is large enough or occurs for long enough the oil level will be low enough to turn the oil pressure or low oil level warning light on.

An oil leak may be noted on the ground where the vehicle is parked. However, many vehicles have plastic trays underneath the engine that may catch leaking oil and conceal the leak. In such cases, a low oil level, a burning oil smell, or even smoke from oil burning in the engine bay may be noted.

»MORE: Signs of a bad oil pan gasket

The engine oil pressure warning light will come on if the engine oil pressure is low, or if the oil pressure sensor is faulty. In either case, engine power may be reduced significantly. The check engine light may also illuminate, and an on-board diagnostic (OBD) trouble code will be stored in the vehicle's computer.

What are the initial steps to diagnose an oil leak in a 2010 Chrysler Town & Country?

To effectively diagnose an oil leak in your 2010 Chrysler Town & Country, start by locating the leak, which often begins with a visual inspection under the vehicle. Look for oil spots on the ground, as these can indicate the leak's source. Next, inspect the oil pan for any visible signs of damage or leakage; if the bolts are loose, tightening them may resolve the issue. The oil filter should also be checked for proper installation and any signs of leaks, as a faulty filter can contribute to oil loss. Don’t forget to examine the oil drain plug to ensure it is secure, as a loose plug can lead to significant leaks. Additionally, inspect the valve cover gasket for any signs of seepage, as this is a common area for leaks. The oil pressure sensor and oil cooler lines should also be assessed for any potential issues. Finally, keep an eye on your oil levels over time to gauge the severity of the leak and track any changes. By following these steps, you can systematically identify the source of the oil leak and take appropriate action to address it.

What are the common causes of oil leaks in a 2010 Chrysler Town & Country?

When dealing with oil leaks in a 2010 Chrysler Town & Country, it's essential to understand the common problems that may arise. One frequent culprit is the failure of oil system components, which can lead to significant leaks if not addressed. Additionally, leaking engine gaskets are a common issue, often resulting from wear and tear over time. Another area to inspect is the oil cooler and oil filter housing, as these components can develop leaks due to improper sealing or damage. Lastly, the oil filter adaptor housing is also known to be a source of leaks, particularly if the filter is not installed correctly or if the housing itself is compromised. By being aware of these potential issues, DIYers can perform regular maintenance and inspections, allowing for timely identification and resolution of oil leaks, ultimately ensuring the vehicle runs smoothly and efficiently.

How urgent is it to address the oil leak in a 2010 Chrysler Town & Country?

Addressing an oil leak in your 2010 Chrysler Town & Country is not just a matter of routine maintenance; it is a critical issue that demands immediate attention. Ignoring an oil leak can lead to severe engine damage, increased repair costs, and even safety hazards on the road. The most common culprits behind oil leaks in these vehicles include failures in the oil system components and deteriorating engine gaskets. Specifically, if your Town & Country is equipped with a 3.6-liter engine, the oil cooler or oil filter housing is often the source of the leak. While Chrysler recommends replacing the O-rings between the housing and the block as a potential fix, this solution may not always resolve the issue. Therefore, it is essential to act quickly to diagnose and repair the leak to avoid further complications, ensuring both the longevity of your vehicle and your safety while driving.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2010 Chrysler Town & Country Oil Leak Issues | RepairPal