The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.
A faulty cruise control module will simply result in deactivation of cruise control settings. This is because a detected error in the cruise control system could lead to hazardous driving conditions, so the module will be disabled, and the cruise control system warning light will be displayed. This will be a different message depending on make and model, and a warning light or message may be displayed on the driver instrument cluster.
When troubleshooting cruise control issues in your Chrysler Grand Voyager, begin with the simplest checks to avoid unnecessary complications. Start by inspecting the cruise control on/off button; if it feels sticky or unresponsive, gently tapping the back of the steering wheel module may help restore functionality. Next, examine the rear brake light bulbs and ensure the brake light switch is properly adjusted, as these components can directly affect cruise control operation. If these initial steps do not resolve the issue, consider the condition of the control module, sensors, and switches, as failures in these areas are common culprits. Additionally, inspect the clock spring and vacuum lines for any signs of wear or damage, as these can also disrupt the cruise control system. By following this diagnostic approach, you can systematically identify and address the root cause of the cruise control malfunction, making your DIY repair process more efficient and effective.
When dealing with a malfunctioning cruise control system in a Chrysler Grand Voyager, it's crucial to understand the common problems that could be at play. One of the primary culprits is a failed control module, which can disrupt the entire system's functionality. Additionally, sensor issues, particularly with the throttle position sensor, can lead to erratic behavior, such as excessive fuel consumption and black exhaust emissions. It's also important to check for blown fuses or a defective brake pedal position sensor, as these can prevent the cruise control from engaging. Other potential issues include throttle body malfunctions and problems with the PRNDL or shifter position switch, which can interfere with the system's operation. In older models, a broken vacuum line may also be a factor. Lastly, don't overlook the impact of a faulty brake light or a check engine light, as these can signal underlying engine-related problems that affect cruise control performance. By systematically addressing these common issues, DIYers can effectively troubleshoot and restore their vehicle's cruise control functionality.
When the cruise control in your Chrysler Grand Voyager fails, it’s crucial to address the issue promptly, as neglecting it can lead to safety risks and potentially more significant vehicle problems. A blown fuse or a defective brake pedal switch are common culprits that can easily be checked and replaced, but overlooking these simple fixes may result in more complicated repairs down the line. Additionally, issues with the throttle control system or the ABS can not only affect cruise control functionality but also compromise overall vehicle performance. If the cruise control operates intermittently or the CRUISE light fails to illuminate, it’s a clear sign that immediate attention is needed, as these symptoms often indicate underlying electrical issues that could escalate if ignored. Furthermore, a malfunctioning cruise control system can distract the driver, increasing the risk of accidents. Therefore, it’s essential to troubleshoot these problems as soon as they arise to maintain both safety and the integrity of your vehicle.
Read about related problems experienced by other Chrysler Grand Voyager drivers like you.
See what others are asking about their Chrysler Grand Voyager. Get answers from RepairPal's community of auto experts and enthusiasts.