2013 Chevrolet Spark Tire Pressure Warning Light Stays On

Resolve Tire Pressure Warning Light in 2013 Chevrolet Spark for Safe Driving

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2013 Chevrolet Spark tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Chevrolet Spark tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue on my 2013 Chevrolet Spark?

To effectively diagnose the tire pressure warning light issue on your 2013 Chevrolet Spark, begin with a thorough check of the tire pressure in all four tires using a reliable tire pressure gauge. Ensure that each tire is inflated to the recommended levels outlined in your vehicle's manual, as improper inflation is a common cause of warning lights. Next, visually inspect the tires for any signs of damage, such as punctures, cuts, or bulges, which could indicate a more serious problem. If the tire pressure is correct and the tires appear undamaged, consider resetting the tire pressure monitoring system (TPMS), as sometimes the system may require a reset to clear the warning light. Refer to your vehicle's manual for specific instructions on how to perform this reset. Additionally, check the TPMS sensors on each tire to ensure they are functioning correctly, as faulty sensors can also trigger the warning light. If these steps do not resolve the issue, it may be necessary to consult a professional mechanic or dealership for a more in-depth diagnosis. By following this diagnostic approach, you can systematically address the tire pressure warning light issue and ensure your vehicle remains safe and roadworthy.

What could cause the tire pressure warning light to stay on in a 2013 Chevrolet Spark?

When the tire pressure warning light stays on in a 2013 Chevrolet Spark, it can signal several common issues that DIYers can address. The first step is to check for low tire pressure, which is the most frequent cause. Using a tire pressure gauge, you can easily measure the pressure in each tire and inflate them to the recommended levels if necessary. If the light remains on after correcting the pressure, the next possibility is a faulty tire pressure sensor, which may need to be replaced. Additionally, the sensors might require recalibration to ensure accurate readings; this can sometimes be done at home with the right tools. Electrical faults within the tire pressure monitoring system can also lead to the warning light staying illuminated, which may require a more thorough inspection of the vehicle's electrical components. Lastly, ensure that the sensors are clean and unobstructed, as dirt or debris can interfere with their functionality. By methodically checking these potential issues, you can effectively troubleshoot and resolve the tire pressure warning light problem in your Chevrolet Spark.

How urgent is it to address the tire pressure warning light that stays on in a 2013 Chevrolet Spark?

Addressing the tire pressure warning light in your 2013 Chevrolet Spark is not just a matter of convenience; it is a critical safety concern that demands immediate attention. Ignoring this warning can lead to serious safety risks, as low tire pressure significantly impacts vehicle handling and braking, increasing the likelihood of accidents, particularly in challenging driving conditions. Furthermore, driving on underinflated tires accelerates uneven wear, which not only shortens the lifespan of your tires but also raises the risk of a blowout, potentially leading to costly repairs and dangerous situations on the road. Additionally, maintaining proper tire pressure is essential for optimal fuel efficiency; neglecting the warning light can result in decreased gas mileage, ultimately increasing your fuel expenses. Lastly, the Tire Pressure Monitoring System (TPMS) is designed to keep you informed about tire health, and ignoring its alerts can compromise its effectiveness, leaving you unaware of critical tire issues. Therefore, it is imperative to address the tire pressure warning light promptly to ensure your safety, protect your vehicle, and save on future costs.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.