2013 Buick Encore Tire Pressure Warning Light Stays On

Resolve Tire Pressure Warning Light in 2013 Buick Encore: Causes and Solutions

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2013 Buick Encore tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Buick Encore tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue on my 2013 Buick Encore?

To effectively diagnose the tire pressure warning light issue on your 2013 Buick Encore, begin with a straightforward approach by checking the tire pressure in all four tires using a reliable tire pressure gauge. Ensure that each tire is inflated to the recommended levels outlined in your vehicle's manual, as improper inflation is a common cause of warning lights. Next, conduct a visual inspection of the tires for any signs of damage, such as punctures, cuts, or bulges, which could indicate a more serious problem. If the tire pressure is correct and the tires appear undamaged, consider resetting the tire pressure monitoring system (TPMS), as it may require recalibration. Refer to your vehicle's manual for specific instructions on how to perform this reset. Additionally, inspect the TPMS sensors located on each tire to confirm they are functioning correctly and are not damaged. If, after completing these steps, the warning light remains illuminated, it is advisable to consult a mechanic or dealership for a professional diagnosis of the TPMS system. By following this diagnostic approach, you can systematically address the issue and ensure your vehicle's safety on the road.

What are the common causes for the tire pressure warning light to remain on in a 2013 Buick Encore?

When the tire pressure warning light remains illuminated in your 2013 Buick Encore, it’s essential to understand the common problems that could be causing this issue. One of the primary culprits is low tire pressure, which can occur due to natural air loss, temperature fluctuations, or slow leaks. Regularly checking and maintaining the correct tire pressure is crucial for both safety and fuel efficiency. Another potential issue could be a faulty tire pressure sensor; if the sensor is malfunctioning, it may not provide accurate readings, leading to a persistent warning light even when tire pressure is adequate. Additionally, the sensors in the tire pressure monitoring system (TPMS) are equipped with batteries that can deplete over time, necessitating replacement to ensure proper functionality. Calibration of the sensors is also vital, as incorrect calibration can result in false alerts. Lastly, a malfunction within the TPMS itself, such as wiring issues or problems with the control module, can prevent accurate monitoring of tire pressure. Addressing these common problems can help you resolve the warning light issue and maintain the safety and performance of your vehicle. If you find it challenging to diagnose or fix the problem, seeking assistance from a qualified mechanic is advisable.

How urgent is it to address the tire pressure warning light that stays on in a 2013 Buick Encore?

When the tire pressure warning light remains illuminated in a 2013 Buick Encore, it is crucial to take immediate action. This warning signifies that the Tire Pressure Monitoring System (TPMS) has detected low air pressure in one or more tires, which can lead to serious safety hazards if ignored. Neglecting this warning can result in decreased fuel efficiency, uneven tire wear, and compromised handling, ultimately putting the driver and passengers at risk. Additionally, a persistent warning light may indicate a tire leak, which could lead to a flat tire if not addressed promptly. To ensure safe driving conditions, it is advisable to check the tire pressure with a gauge and inflate the tires to the recommended levels. If the warning light does not turn off after correcting the tire pressure, further investigation is necessary, which may include resetting the TPMS or consulting a professional for a thorough inspection. Taking these steps not only enhances safety but also helps maintain the vehicle's performance and longevity.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.