2018 BMW Alpina B7 Tire Pressure Warning Light Stays On

Resolve Persistent Tire Pressure Warning Light in 2018 BMW Alpina B7

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2018 BMW Alpina B7 tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2018 BMW Alpina B7 tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue in my 2018 BMW Alpina B7?

When diagnosing the tire pressure warning light issue in your 2018 BMW Alpina B7, it's essential to adopt a systematic approach that prioritizes simpler solutions before delving into more complex diagnostics. Begin by checking the tire pressure in all four tires using a reliable tire pressure gauge, ensuring that the readings align with the manufacturer's specifications found in your owner's manual or on the sticker located inside the driver's door jamb. Next, conduct a thorough visual inspection of each tire for any signs of damage, such as punctures, cuts, or bulges, as these can lead to pressure loss and trigger the warning light. Additionally, look for potential leaks by examining the tires and valve stems; a simple mixture of soap and water can help identify leaks, as bubbles will form where air escapes. If you've adjusted the tire pressure, remember to reset the tire pressure monitoring system (TPMS) according to the instructions in your vehicle's manual, as this may be necessary for the warning light to turn off. However, if the warning light remains illuminated despite these efforts, it may indicate a more serious issue with the TPMS sensors or system, at which point consulting a mechanic or dealership for further diagnosis and repair is advisable. By following this structured diagnostic approach, you can effectively address the tire pressure warning light issue in your BMW Alpina B7.

What could be causing the tire pressure warning light to remain on in a 2018 BMW Alpina B7?

When the tire pressure warning light remains on in a 2018 BMW Alpina B7, it can signal several common issues that DIY enthusiasts can troubleshoot. The first step is to check the tire pressure in all four tires, as low pressure is the most frequent cause of the warning light. Ensure that each tire is inflated to the manufacturer's recommended levels, typically found on a sticker inside the driver's door. If the pressure is adequate, inspect the tires for any visible damage or punctures that could indicate a slow leak. Another possibility is a faulty tire pressure sensor; if the sensors are malfunctioning, they may need to be replaced. Additionally, the sensors might require recalibration, which can often be accomplished through a simple reset procedure outlined in the vehicle's manual. Lastly, if you suspect electrical issues, such as faulty wiring or a malfunctioning control module, these may necessitate professional diagnosis. Addressing these issues promptly is crucial for maintaining vehicle safety and performance, making it beneficial for DIYers to understand these potential problems.

How urgent is it to address the tire pressure warning light on a 2018 BMW Alpina B7 that stays on?

Addressing the tire pressure warning light on your 2018 BMW Alpina B7 is not just a matter of convenience; it is a critical safety concern that requires immediate attention. When this warning light remains illuminated, it signals that one or more tires may be underinflated, which can severely compromise your vehicle's handling and braking capabilities. This increased risk of accidents, particularly in emergency situations, underscores the urgency of resolving the issue. Additionally, driving on underinflated tires can lead to uneven wear, significantly shortening their lifespan and potentially resulting in a dangerous blowout. Beyond safety, low tire pressure can also negatively impact your fuel efficiency, leading to higher fuel costs over time. Furthermore, ignoring the warning could indicate a malfunction in the Tire Pressure Monitoring System (TPMS), which may necessitate costly repairs. Therefore, it is essential to promptly check and address the tire pressure to ensure your safety, maintain vehicle performance, and avoid further complications.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2018 BMW Alpina B7 Tire Pressure Warning Light Issues