2014 Audi Allroad Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2014 Audi allroad and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2014 Audi allroad cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2014 Audi allroad cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

What are the steps to diagnose the non-functioning cruise control in a 2014 Audi allroad?

To effectively diagnose the non-functioning cruise control in your 2014 Audi allroad, begin with a systematic approach that prioritizes simpler checks before delving into more complex diagnostics. Start by inspecting the cruise control fuse located in the fuse box, as a blown fuse can often be the simplest explanation for the malfunction. Next, examine the cruise control buttons on the steering wheel to ensure they are operational, since a faulty button can hinder functionality. Utilizing a diagnostic scanner to check for error codes from the vehicle's onboard computer can provide valuable insights into any underlying issues. Additionally, inspect the speed sensors on the wheels, as these components are crucial for the cruise control system to function correctly. Don’t forget to test the brake pedal switch, which is designed to disengage the cruise control when pressed; a malfunction here can also lead to issues. Finally, take a close look at the wiring and connections associated with the cruise control system, as any loose or damaged wires can disrupt the necessary signals. By following this structured diagnostic approach, you can efficiently identify and address the root cause of your cruise control problem.

What are the common problems that could cause the cruise control to stop working in a 2014 Audi allroad?

When the cruise control in a 2014 Audi allroad ceases to function, several common problems may be at play. One of the primary culprits is a faulty brake pedal switch, which is designed to disengage the cruise control when the brake is applied; if this switch malfunctions, it can prevent the system from engaging. Additionally, issues with the speed sensor can disrupt the cruise control's operation, as an inaccurate reading of the vehicle's speed can lead to failure in maintaining the desired speed. Another potential issue is a blown fuse related to the cruise control system; checking and replacing any damaged fuses can often resolve this problem. Furthermore, a malfunctioning throttle actuator, which regulates the engine's throttle opening, can hinder the cruise control's ability to sustain speed. Problems with the Electronic Control Module (ECM), which oversees various vehicle functions, including cruise control, can also result in system failure. Lastly, wiring issues, such as faulty connections, can impede communication between components, leading to operational disruptions. By understanding these common problems, DIYers can effectively troubleshoot and potentially resolve cruise control issues in their Audi allroad.

How urgent is it to address the malfunctioning cruise control in a 2014 Audi allroad?

Addressing a malfunctioning cruise control system in a 2014 Audi allroad is of utmost importance due to the inherent safety risks involved. A malfunction can lead to unexpected acceleration or deceleration, which not only endangers the driver and passengers but also poses a threat to other road users. Promptly resolving this issue is crucial to prevent accidents that could arise from erratic vehicle behavior. Additionally, neglecting the problem may result in further damage to the vehicle's components, leading to more extensive and costly repairs down the line. Therefore, it is essential for DIY enthusiasts to prioritize diagnosing and fixing cruise control malfunctions to ensure both safety and the longevity of their vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2014 Audi Allroad Cruise Control Malfunctions Explained