Problem Description and Possible Solution
The HVAC blower motor may stop working at one or more speeds due to a faulty blower motor resistor block. Our technicians recommend to confirm the resistor is at fault by first checking the operation of the switch.
Average mileage: 122,007 (17,000–250,000)
72 people reported this problem
fan speed only works on high setting.
Lost speeds 1-3. 4 and 5 work fine.
The 5th speed on the fan doesn't work. I tried replacing the resistor, fuse relay and switch. Still not fixed.
I have this problem too.. The fan works on every speed except 3. What exactly is the way to fix this?
Speeds 1, 2 , and 3 do not work
blower runs for a few minutes then it slows right down. when i start the blower i start it on full blast and get a couple minutes out of it before it slows to a stop.
1,2,3,4,5went out 1@atime now none wkz Need2knw wat2do2fix dnt have $$-TRIN2FIX..any Real help4 advice feelfree
Only blows air out on 3,4,5 have 99 been like that since 2003. Never fixed it.
heater works on high only
Fan speeds quit working one by one until only the highest fan setting is left working.... at least for now!
Setting number 1 and 2 on the ac fan switch doesn't work.
fan speeds 1,2,3,dont work
Heat would not work on 1 2 or 3 has worked on 4 and 5. Just recently it has stopped blowing out heat and nothing blows out anymore
I am living with it, as it still works on 3 and 4
No air blows from vents when switch turned 1-5. Replaced blower motor resistor and worked for 2 days level 1-4.
My cars air speeds have stopped working. it was working for the 4 and 5 settings, now it stopped.
The heat / air only works on the highest speed and it's not blowing out real hot air. I don't know about the air conditioner, too cold out to test it.
ac does not work due to blower motors not working. heat will not come on until it is on number 3 back window brackets broke so window does not go up or down