2010 Toyota Corolla Recalls

(RepairPal Expert Overview)

Southeast Toyota is recalling certain vehicles because the seat heater element may become damaged as a result of compression of the seat cushion. The damaged element could short causing burning of the seat cushion, increasing the risk of personal injury. Dealers will disconnect seat heaters with copper strand elements and refund the purchase price of the seat heater accessory to correct this concern.

(RepairPal Expert Overview)

The steering column assembly contains electrical connections for the driver's airbag, commonly called the "clock spring". This spiral cable assembly includes a Flexible Flat Cable (FFC). Due to the shape and location of the FFC's retainer, the FFC could become damaged when the steering wheel is turned. If the FFC is damaged, the driver's airbag could be deactivated. The failure of the driver's airbag to deploy when required increases the risk of injury to the driver. When the parts are available, dealers will replace the spiral cable assembly to correct this concern.

(RepairPal Expert Overview)

Vehicles have a tire size/weight rating label to inform owners of the carrying capacity of their vehicle. These models are being recalled because the incorrect vehicle weight rating is shown on the information label. This could result in vehicle and tire overloading, increasing the risk of tire failure. Owners will be provided an updated vehicle weight label to correct this concern.

(RepairPal Expert Overview)

Vehicles that have had accessories added to the seats such as seat heaters, seat covers or DVD headrests may not have the occupant sensor system of the passenger seat calibrated properly. This can affect passenger air bag operation in a crash. Dealers will test the sensitivity of the occupant detection sensors and recalibrate them as necessary free of charge to resolve the concern.

(RepairPal Expert Overview)

Southeast Toyota is recalling 518 vehicles equipped with an aftermarket navigation unit or overhead entertainment system, and/or a bluetooth hands-free device. There is a possibility that the front A-pillar trim panel retention clip may have been damaged during the installation of the aftermarket accessory. The trim piece may come loose in the event of a crash, increasing the risk of injury. Dealers will inspect the A-pillar trim and replace the retaining clip as necessary.

 

(RepairPal Expert Overview)

These vehicle were sold without the required load carrying captivity modification label. Dealers will mail the corrected label to vehicle owners. Owners have the option of requesting that the dealer install the label. This recall is expected to begin on May 27, 2010.

(RepairPal Expert Overview)

Southeast Toyota is recalling 2005–2011 models for failing to comply with federal safety standards on tire selection and rims. Affected models were sold without the proper load-carrying capacity modification labels, which may cause the driver to overload the vehicle, increasing the chance of a crash. Dealers will mail the correct labels to the customer or install the label free of charge.

(RepairPal Expert Overview)

Toyota is recalling certain 2008-2010 Highlander, and 2009-2010 Corolla, Venza, and Matrix models because an unsecured or incompatible floor mat may cause the accelerator pedal to get stuck in the wide open position. This can cause high vehicle speeds and may make the vehicle difficult to stop, which can lead to a crash. Toyota will modify or replace the accelerators on the affected vehicles.

(RepairPal Expert Overview)

Toyota is recalling 2005–2010 Avalon; 2007–2010 Camry, 2009–2010 Corolla, Corolla Matrix, and Rav4; 2010 Highlander; 2008–2010 Sequoia; and 2007–2010 Tundra models because the sliding surface of the friction lever may become smooth during operation, which can cause condensation. This may cause the accelerator pedal to become harder to depress, slower to return, or to become stuck in a partially depressed position, which can increase the risk of a crash. Dealers will install a reinforcement bar in the accelerator pedal so it will operate smoothly.

(RepairPal Expert Overview)

In extremely low temperatures, condensation in the brake booster vacuum port may freeze, causing an increase in stopping distance, which can lead to a crash. Dealers will install a new intake air connector to relocate the brake vacuum port. The recall began on October 23, 2009. The GM recall number is 09199.