Wheel Speed Sensor Replacement near Elkin, North Carolina

There are 23 RepairPal Certified locations for Wheel Speed Sensor Replacement, all with a minimum 12,000-mile/12-month warranty.

23 Results for Wheel Speed Sensor Replacement near Elkin, North Carolina

Wheel Speed Sensor Replacement can be completed at all of these locations, along with other repairs and services.

Christian Brothers Automotive- Robinhood

4.8

(93)

25.7 mi

5262 Fleetwood Circle

Winston Salem, NC

Closed

Opens 7:00 AM Fri

Call

Meineke Car Care #2731

4.6

(19)

25.8 mi

3384 W Us Highway 421

Wilkesboro, NC

Closed

Opens 7:30 AM Fri

Call

SpeeDee Oil Change & Auto Service - Winston-Salem

4.3

(19)

29.02 mi

112 University Center Drive

Winston Salem, NC

Closed

Opens 8:00 AM Fri

Call

Midas - Winston Salem

4.3

(40)

29.63 mi

7831 North Point Boulevard

Winston Salem, NC

Closed

Opens 7:30 AM Fri

Call

Rattle And Hum Automotive

4.8

(116)

32.5 mi

894 N Liberty St

Winston-Salem, NC

Closed

Opens 8:00 AM Fri

Call

Precision Tune Auto Care - 059-18

4.1

(684)

32.62 mi

1529 Peters Creek Pkwy

Winston-Salem, NC

Closed

Opens 8:00 AM Fri

Call

Affordable Motors

4.9

(30)

34.76 mi

3229 Old Lexington Road

Winston Salem, NC

Closed

Opens 9:00 AM Fri

Call

Meineke - 2394

4.4

(160)

37.04 mi

5267 Neal Trail Drive

Walkertown, NC

Closed

Opens 7:30 AM Fri

Call

Blue Ridge Tire & Brake

4.8

(32)

39.9 mi

562 South Main Street

Jefferson, NC

Closed

Opens 8:00 AM Fri

Call

Troutman Auto Care

4.9

(21)

40.12 mi

133 North Main Street

Troutman, NC

Closed

Opens 8:00 AM Fri

Call

Tire Max Total Car Care #6022

4.5

(72)

44.46 mi

7705 North Carolina 68

Stokesdale, NC

Closed

Opens 7:30 AM Fri

Call

Treadz

4.9

(9)

45.63 mi

2118 Charlotte Highway

Mooresville, NC

Closed

Opens 8:00 AM Fri

Call

View All 23 Locations

Wheel Speed Sensor Replacement

How are ABS wheel speed sensor issues diagnosed?

Anti-lock braking systems are complex, and are typically diagnosed through professional computer scanning equipment, or manufacturer specific software. The technician will communicate with the ABS control module via computer, and view real-time data to determine what fault has been detected, and how the system is behaving. Once the technician identifies a suspected wheel speed sensor failure, physical inspection and probing will take place to ensure an accurate diagnosis. This includes inspecting the tip of the sensor for dirt and debris.

How is a ABS wheel speed sensor replaced?

Wheel sensor replacement is done by disconnecting the electrical connectors, and unscrewing the sensor from the wheel hub. On some models, the wheel sensor is non-serviceable, and the entire hub must be replaced. This involves removing the wheel, brakes, drive axles, if needed, and finally the wheel hub and bearing assembly. The lower ball joint will need to be disconnected from the steering spindle or lower control arm to allow the drive axle to move freely away from the wheel hub and bearing assembly.

RepairPal Recommendations for ABS wheel speed sensor issues

While inspecting and testing wheel sensors, the wheels may be removed from the vehicle, allowing the servicing technician to inspect brake and tire wear, as well as suspension components. Also, if the wheel speed sensor is determined to be malfunctioning due to dust and grime buildup, consider having the other wheel speed sensors examined to prevent future unexpected failures.

What to look out for when dealing with ABS wheel speed sensor issues

The wheel speed sensor is the most basic component in the ABS system, and the most likely to fail. The cost of a wheel sensor repair can be negligible, but if the sensor is non-serviceable the cost will rise dramatically as the mentioned disassembly and reassembly is required.

Can I replace the ABS wheel speed sensor myself?

Wheel speed sensors can be changed by the DIYer, but diagnosis should be left to a professional for time and cost savings. The cost of diagnostics is often less than replacing the wrong part, especially if the ABS light is on for a reason other than the wheel sensor. If speed sensor replacement requires wheel hub and bearing assembly removal, consider letting a certified repair facility complete the repair.