Oil Change near Clinton, Maryland

There are 50 RepairPal Certified locations for Oil Change, all with a minimum 12,000-mile/12-month warranty.

50 Results for Oil Change near Clinton, Maryland

Oil Change can be completed at all of these locations, along with other repairs and services.

Shop Image

Ford Master's Auto Repair

4.6
(39)
2.06 mi
7925 Old Branch Ave
Clinton, MD
Open
Closes 5:00 PM
Call
Shop Image

Mz Auto Repair

4.9
(16)
3.28 mi
9500 Allentown Rd
Fort Washington, MD
Closed
Opens 8:00 AM Fri
Call
Shop Image

Marlboro Auto Repair, Tire & Collision

3.9
(37)
6.02 mi
7830 Penn Western Court
Upper Marlboro, MD
Open
Closes 8:00 PM
Call
Shop Image

Colonial Auto Repair

4.9
(15)
8.12 mi
13200 Old Marlboro Pike
Upper Marlboro, MD
Open
Closes 6:00 PM
Call
Shop Image

Cottman Transmission and Total Auto Care of Waldorf

4.6
(301)
8.18 mi
11780 Holly Auto Center Lane
Waldorf, MD
Open
Closes 6:00 PM
Call
Shop Image

Ashten's Total Auto Care

4.8
(14)
8.54 mi
11725 Bad Dog Alley
Waldorf, MD
Open
Closes 6:30 PM
Call
Shop Image

Q3 Car and Truck Repair

4.5
(228)
8.66 mi
1414 Ritchie Marlboro Road
Capital Heights, MD
Open
Closes 5:30 PM
Call
Shop Image

All Things Transmissions

3.8
(20)
8.66 mi
1414 Ritchie Marlboro Rd - A9
Capitol Heights, MD
Open
Closes 5:00 PM
Call
Shop Image

M & D Auto Repair

4.7
(15)
9.34 mi
6118 Old Central Avenue
Capitol Heights, MD
Open
Closes 6:00 PM
Call
Shop Image

RAS Auto & Cycle

4.6
(114)
9.39 mi
35 Henry Ford Cir
Waldorf, MD
Open
Closes 6:00 PM
Call
Shop Image

J.J.'s Auto Service Center

4.8
(217)
9.47 mi
2 Irongate Drive
Waldorf, MD
Open
Closes 6:00 PM
Call
Shop Image

AYT SERVICE CENTER

4.7
(40)
9.48 mi
6520 Central Ave
Capitol Heights, MD
Open
Closes 5:00 PM
Call

Oil Change

How a mechanic performs an oil change

To change the oil, a technician allows the engine to cool down, then removes the drain plug at the bottom of the engine oil pan and drains the oil. As the oil is draining they will remove and replace the oil filter. When the oil has fully drained the drain plug is re-installed and the engine is filled with the proper type and amount of new oil. The engine is started and checked for leaks. Finally, the engine is switched off, the oil level rechecked, and the maintenance light reset. While the oil is being serviced, the technician will note any obvious issues with the condition of the engine seals, amount of oil drained, last service date and mileage, and the drained oil's condition. If any abnormalities are noticed, recommendations for diagnosis or repair are made. Most manufacturers have now included panels that are attached to the vehicle's underside; they offer a measure of protection from debris and a means of controlling air flow to the engine and around the vehicle. These panels often completely cover the engine/transmission from below, blocking all access. Removal of one (or more) of these panels and their correct re-installation adds two new steps to the process of an oil change.
Oil Change

Other oil change considerations

When changing or adding engine oil, follow the manufacturer's recommendation for the grade, often referred to as "weight" (0/30W, 5/30W, 20/50W, etc.), and type (petroleum or synthetic base) of oil to use. The grade is based on the oil's ability to flow - "viscosity". Modern engines are especially sensitive to the kind of lubricants used. Using an incorrect type or grade can cause the oil pressure light to illuminate, the engine to make abnormal noises, the check engine light to come on and may invalidate your manufacturer's warranty. So, always ask what oil you are getting, and know what is recommended for your car. Consulting your owner's manual is the best way to ensure you are using the correct fluids for your vehicle.

Can I perform an oil change myself?

An engine oil change can be performed by intermediate DIYers. However, before attempting this service or ordering parts, be sure to look up the specifications and procedures for your particular vehicle. Most will require raising the vehicle to access the oil pan drain plug, and it is critical that the oil is refilled to the proper level, and that the oil filter is installed correctly. If there is any concern about completing this service properly, consider contacting your local RepairPal Certified shop.