Mass Airflow Sensor Replacement near Thousand Oaks, California

There are 50 RepairPal Certified locations for Mass Airflow Sensor Replacement, all with a minimum 12,000-mile/12-month warranty.

50 Results for Mass Airflow Sensor Replacement near Thousand Oaks, California

Mass Airflow Sensor Replacement can be completed at all of these locations, along with other repairs and services.

Schneider's Automotive Repair

4.8

(389)

8.13 mi

607 E Los Angeles Ave

Simi Valley, CA

Closed

Opens 7:30 AM Mon

Call the shop at (805) 242-4832 for appointment availability

Call for Availability

Akey Brakey Auto Repair, Smog & Tire

4.5

(53)

8.24 mi

28118 Dorothy Dr.

Agoura Hills, CA

Closed

Opens 8:00 AM Mon

Call

Dependable Car Care - Simi Valley

4.8

(50)

8.59 mi

964 Chambers Ln

Simi Valley, CA

Closed

Opens 7:30 AM Mon

Call

Mekaniks Plus European Specialties

4.5

(15)

9.38 mi

130 S Dawson Dr

Camarillo, CA

Closed

Opens 8:00 AM Mon

Call

C & M Automotive and Transmission

4.4

(371)

11.31 mi

4292 Valley Fair St

Simi Valley, CA

Closed

Opens 7:30 AM Mon

Call

Yosemite Auto Care

4.8

(85)

13.04 mi

5956 East Los Angeles Avenue

Simi Valley, CA

Closed

Opens 8:00 AM Mon

Call

Dieters Motors Independent

(29)

15.31 mi

2681 Ventura Boulevard

Oxnard, CA

Closed

Opens 8:00 AM Mon

Call

Big Brand Tire - Canoga Park (Full Service Auto Repair)

4.1

(33)

15.48 mi

7100 Topanga Canyon Boulevard

Los Angeles, CA

Closed

Opens 9:00 AM Sun

Call

EAW Automotive

4.8

(97)

15.96 mi

21417 Ingomar St

Canoga Park, CA

Closed

Opens 8:00 AM Mon

Call

Collision Buddy | Above and Beyond Auto Repair!

4.7

(15)

16 mi

5339 Comercio Way

Los Angeles, CA

Closed

Opens 8:00 AM Mon

Call

L&A Garage

(15)

16.04 mi

7105 Eton Avenue

Los Angeles, CA

Closed

Opens 8:00 AM Mon

Call

Mekaniks Plus Auto Repair

4.4

(16)

16.59 mi

632 Pacific Ave

Oxnard, CA

Closed

Opens 8:00 AM Mon

Call

View All 50 Locations

Mass Airflow Sensor Replacement

How are mass airflow sensor issues diagnosed?

When the check engine light is on, and OBD trouble codes refer to the MAF sensor, the servicing technician will begin by inspecting the vehicle for any indications of physical damage before moving on with testing. A computerized scanner will be connected to the vehicle, and current conditions will be compared to current readings from the various sensors in the vehicle. When these conditions are compared and analyzed, the technician relies on their classroom training to understand which component to test. Once one or more components are suspected of failure, the servicing technician will begin testing with the most likely component, until the issue has been verified through testing.

How is a mass airflow sensor replaced?

Replacing the MAF sensor is generally quick and easy. The sensor will typically be on or adjacent to the intake air tube, and the fastener may be a screw or clip. Once the sensor is replaced, the technician will review sensor data, and confirm the issue has been resolved.

RepairPal Recommendations for mass airflow sensor issues

We always recommend contacting the dealership parts department for revised part numbers. There may be a new part number for the mass airflow sensor, which can be a redesigned part that fixes known flaws. Aftermarket sensors may not have these benefits.

What to look out for when dealing with mass airflow sensor issues

There is a common misconception that when an OBD trouble code is read, the component listed in the code should simply be replaced. This isn't always true, and can lead to expensive and unnecessary repairs. The codes actually refer to engine conditions being reported by sensors. Generic code readers are limited by their minimal programming, and typically are not advanced enough to view and test vehicle specific systems. A "MAF Sensor" title in a code does not necessarily mean the sensor has failed, but rather gives the technician a guide on where to begin their diagnosis.

Can I replace the mass airflow sensor myself?

Almost anyone can replace a MAF sensor. They are typically removed with a clamp, or a screw, and have one electrical connector that can be a little tricky on some models. Otherwise, protecting the sensor while working is all there is to it, and the some vehicles will reset related codes while driving.