Fuel Evaporative Canister Replacement near Wilmington, North Carolina

There are 8 RepairPal Certified locations for Fuel Evaporative Canister Replacement, all with a minimum 12,000-mile/12-month warranty.

8 Results for Fuel Evaporative Canister Replacement near Wilmington, North Carolina

Fuel Evaporative Canister Replacement can be completed at all of these locations, along with other repairs and services.

Shop Image

Precision Tune Auto Care - 055-06

4.5
(1304)
7.37 mi
1318 South College Road
Wilmington, NC
Closed
Opens 8:00 AM Sat
Call
Shop Image

Legacy Auto Service | Auto repair in Wilmington

4.6
(21)
7.72 mi
2841 Carolina Beach Road
Wilmington, NC
Closed
Opens 8:00 AM Sat
Call
Shop Image

Cape Fear Auto Clinic

4.7
(17)
8.55 mi
120 Bryan road
Wilmington, NC
Closed
Opens 9:00 AM Mon
Call
Shop Image

Topsail Tire & Auto

4.9
(106)
15.75 mi
180 State Highway 210
Hampstead, NC
Closed
Opens 7:30 AM Mon
Call
Shop Image

Sneads Ferry Tire & Auto

4.5
(82)
32.65 mi
1330 North Carolina 172
Holly Ridge, NC
Closed
Opens 7:30 AM Mon
Call
Shop Image

Precision Tune Auto Care - 055-09

4.1
(822)
47.07 mi
465 Western Blvd.
Jacksonville, NC
Closed
Opens 8:00 AM Sat
Call
Shop Image

Harrells Tire & Auto Service - Jacksonville

3.8
(25)
48.58 mi
1476 Piney Green Road
Jacksonville, NC
Closed
Opens 7:30 AM Mon
Call
Shop Image

Guaranteed Auto Center

4.4
(15)
48.86 mi
437 South Carolina 90
Little River, SC
Closed
Opens 8:00 AM Mon
Call

Fuel Evaporative Canister Replacement

How are fuel evaporative canister issues diagnosed?

When the EVAP system is checked, the purge valve and vent valve are closed, and the pressure is monitored by the fuel pressure sensor. If that pressure drops with both valves closed, there is a leak in the EVAP system. If pressure holds properly, the system passes, and will continue to prevent vapor emissions. The sensor is also used in testing vent valve and purge valve operation. When the valves are open, the pressure sensor reads the fuel tank pressure, and must sense a drop in pressure. If not, the purge valve or vent valve may be faulty.
Fuel Evaporative Canister Replacement

How is a fuel evaporative canister replaced?

When the identified component is faulty, the technician will remove all electrical and vacuum connectors, clean the mating surface for the faulty part, and install a new part. The evap system will then be allowed to run self-diagnostics to test the repair. If additional leaks are present, or other components have failed, the test will fail, and the process will restart.

RepairPal Recommendations for fuel evaporative canister issues

To help prevent issues with the EVAP system, especially the charcoal canister, avoid overfilling or topping off the fuel tank. When the tank is topped off, the charcoal canister may fill with fuel, causing system failure, and degradation of the charcoal canister.

What to look out for when dealing with fuel evaporative canister issues

Many people like to remove EVAP components, but there is nothing to benefit from removal. The system is there to prevent harmful emissions, and increase fuel mileage in the process. When working with fuel, the battery should always be disconnected, and proper precautions taken against fire hazards.

Can I replace the fuel evaporative canister myself?

The EVAP system is best serviced by an experienced DIYer, or a professional technician. Repairing the EVAP system can be a struggle, but with proper understanding the job becomes enjoyable. The biggest mistake is to being changing parts based on hunches and misdiagnosis. That is where this job becomes more expensive than bringing the problem to a professional.

Fuel Evaporative Canister Replacement Cost Estimates