Fuel Evaporative Canister Replacement near Phoenix, Arizona

There are 50 RepairPal Certified locations for Fuel Evaporative Canister Replacement, all with a minimum 12,000-mile/12-month warranty.

50 Results for Fuel Evaporative Canister Replacement near Phoenix, Arizona

Fuel Evaporative Canister Replacement can be completed at all of these locations, along with other repairs and services.

Sun Devil Auto - Downtown Phoenix #2

4.5

(302)

0.49 mi

202 W Van Buren

Phoenix, AZ

Closed

Opens 7:30 AM Sat

Call

AAMCO Transmissions & Total Car Care - W Van Buren

3.4

(34)

0.59 mi

322 West Van Buren Street

Phoenix, AZ

Closed

Opens 8:00 AM Sat

Call

Big Brand Tire - Durango St (Full Service Auto Repair)

4.6

(17)

1.5 mi

123 E. Durango Street

Phoenix, AZ

Closed

Opens 6:30 AM Mon

Call

Toydoc Auto

4.9

(177)

1.89 mi

2124 E Van Buren St

Phoenix, AZ

Closed

Opens 8:00 AM Mon

Call

Big Brand Tire - Buckeye Rd (Full Service Auto Repair)

4.6

(20)

2.26 mi

2424 East Buckeye Road

Phoenix, AZ

Closed

Opens 7:00 AM Mon

Call

Martin's Auto Repair

4.9

(17)

2.99 mi

3636 N 16th St

Phoenix, AZ

Closed

Opens 7:00 AM Mon

Call

Hi-Tech Car Care

4.3

(49)

3.54 mi

2924 E Thomas Rd

Phoenix, AZ

Closed

Opens 7:30 AM Mon

Call

Perez Auto Repair

4.1

(21)

3.83 mi

429 S 35th Ave

Phoenix, AZ

Closed

Opens 8:00 AM Sat

Call

Greulich's Automotive - #1271

4.7

(74)

4.07 mi

1101 East Camelback Road

Phoenix, AZ

Closed

Opens 7:30 AM Sat

Call

Czar Mechanics | Auto repair mechanics in Phoenix, Arizona

4.5

(15)

4.27 mi

4007 East Madison Street

Phoenix, AZ

Closed

Opens 8:00 AM Sat

Call

19th Auto Repair

4.1

(14)

4.51 mi

5014 North 19th Avenue

Phoenix, AZ

Open

Closes 7:00 PM

Call

Sun Devil Auto - Phoenix #27

4.4

(397)

5.08 mi

730 E Bethany Home Rd

Phoenix, AZ

Closed

Opens 7:30 AM Sat

Call

View All 50 Locations

Fuel Evaporative Canister Replacement

How are fuel evaporative canister issues diagnosed?

When the EVAP system is checked, the purge valve and vent valve are closed, and the pressure is monitored by the fuel pressure sensor. If that pressure drops with both valves closed, there is a leak in the EVAP system. If pressure holds properly, the system passes, and will continue to prevent vapor emissions. The sensor is also used in testing vent valve and purge valve operation. When the valves are open, the pressure sensor reads the fuel tank pressure, and must sense a drop in pressure. If not, the purge valve or vent valve may be faulty.

How is a fuel evaporative canister replaced?

When the identified component is faulty, the technician will remove all electrical and vacuum connectors, clean the mating surface for the faulty part, and install a new part. The evap system will then be allowed to run self-diagnostics to test the repair. If additional leaks are present, or other components have failed, the test will fail, and the process will restart.

RepairPal Recommendations for fuel evaporative canister issues

To help prevent issues with the EVAP system, especially the charcoal canister, avoid overfilling or topping off the fuel tank. When the tank is topped off, the charcoal canister may fill with fuel, causing system failure, and degradation of the charcoal canister.

What to look out for when dealing with fuel evaporative canister issues

Many people like to remove EVAP components, but there is nothing to benefit from removal. The system is there to prevent harmful emissions, and increase fuel mileage in the process. When working with fuel, the battery should always be disconnected, and proper precautions taken against fire hazards.

Can I replace the fuel evaporative canister myself?

The EVAP system is best serviced by an experienced DIYer, or a professional technician. Repairing the EVAP system can be a struggle, but with proper understanding the job becomes enjoyable. The biggest mistake is to being changing parts based on hunches and misdiagnosis. That is where this job becomes more expensive than bringing the problem to a professional.