Fuel Evaporative Canister Replacement near Ossining, New York

There are 50 RepairPal Certified locations for Fuel Evaporative Canister Replacement, all with a minimum 12,000-mile/12-month warranty.

50 Results for Fuel Evaporative Canister Replacement near Ossining, New York

Fuel Evaporative Canister Replacement can be completed at all of these locations, along with other repairs and services.

Allison Auto Center

4.6

(115)

2.57 mi

212 N Highland Ave

Ossining, NY

Closed

Opens 9:00 AM Mon

Call

Vinney's Automotive

4.9

(77)

5.89 mi

195 N. Route 9W

Congers, NY

Closed

Opens 8:00 AM Mon

Call

Leo Sun Auto Repair

4.6

(16)

7.62 mi

377 North Broadway

Sleepy Hollow, NY

Closed

Opens 7:00 AM Mon

Call

AutoClinic

4.8

(49)

11.82 mi

9 Lupi Plaza

Mahopac, NY

Closed

Opens 8:00 AM Mon

Call

West Point Transmission & Auto care | Complete Auto Repair

4.8

(15)

13.38 mi

1368 Route 9W

Highland Falls, NY

Closed

Opens 8:00 AM Mon

Call

Giacomo Service II - Palmer Ave

4.9

(18)

18.64 mi

2107 Palmer Ave

Larchmont, NY

Closed

Opens 7:00 AM Mon

Call

Hughes Motors Corp Auto Repair

4.9

(102)

19.07 mi

493 Central Park Avenue

Yonkers, NY

Closed

Opens 8:00 AM Mon

Call

Exquizit Auto Repair

(15)

20.85 mi

738 S 3rd Ave

Mt Vernon, NY

Closed

Opens 9:00 AM Mon

Call

Central Bergen Auto & Light Truck | Auto repair in Bergenfield

4.8

(164)

21.07 mi

51 Woodbine St

Bergenfield, NJ

Closed

Opens 8:00 AM Mon

Call

Co-Op City Tire & Auto

4.7

(15)

21.4 mi

3525 Conner Street

Bronx, NY

Closed

Opens 8:00 AM Mon

Call

Richter's Service

4.8

(48)

21.47 mi

209 S Maple Ave

Ridgewood, NJ

Closed

Opens 8:00 AM Mon

Call

Accurate Auto Repair | Auto Repairs in Norwalk & Westport

4.7

(10)

22.83 mi

8 Fitch St

Norwalk, CT

Closed

Opens 7:30 AM Mon

Call

View All 50 Locations

Fuel Evaporative Canister Replacement

How are fuel evaporative canister issues diagnosed?

When the EVAP system is checked, the purge valve and vent valve are closed, and the pressure is monitored by the fuel pressure sensor. If that pressure drops with both valves closed, there is a leak in the EVAP system. If pressure holds properly, the system passes, and will continue to prevent vapor emissions. The sensor is also used in testing vent valve and purge valve operation. When the valves are open, the pressure sensor reads the fuel tank pressure, and must sense a drop in pressure. If not, the purge valve or vent valve may be faulty.

How is a fuel evaporative canister replaced?

When the identified component is faulty, the technician will remove all electrical and vacuum connectors, clean the mating surface for the faulty part, and install a new part. The evap system will then be allowed to run self-diagnostics to test the repair. If additional leaks are present, or other components have failed, the test will fail, and the process will restart.

RepairPal Recommendations for fuel evaporative canister issues

To help prevent issues with the EVAP system, especially the charcoal canister, avoid overfilling or topping off the fuel tank. When the tank is topped off, the charcoal canister may fill with fuel, causing system failure, and degradation of the charcoal canister.

What to look out for when dealing with fuel evaporative canister issues

Many people like to remove EVAP components, but there is nothing to benefit from removal. The system is there to prevent harmful emissions, and increase fuel mileage in the process. When working with fuel, the battery should always be disconnected, and proper precautions taken against fire hazards.

Can I replace the fuel evaporative canister myself?

The EVAP system is best serviced by an experienced DIYer, or a professional technician. Repairing the EVAP system can be a struggle, but with proper understanding the job becomes enjoyable. The biggest mistake is to being changing parts based on hunches and misdiagnosis. That is where this job becomes more expensive than bringing the problem to a professional.