Fuel Evaporative Canister Replacement near Lafayette, Indiana

There are 9 RepairPal Certified locations for Fuel Evaporative Canister Replacement, all with a minimum 12,000-mile/12-month warranty.

9 Results for Fuel Evaporative Canister Replacement near Lafayette, Indiana

Fuel Evaporative Canister Replacement can be completed at all of these locations, along with other repairs and services.

Shop Image

Auto Diagnostic & Repair Center

4.7
(77)
2.99 mi
70 Creasy Ct
Lafayette, IN
Closed
Opens 8:00 AM Mon
Call
Shop Image

MIdas - Frankfort

4.3
(20)
22.99 mi
1541 East Wabash Street
Frankfort, IN
Closed
Opens 7:30 AM Sat
Call
Shop Image

Midas - Crawfordsville

4.3
(20)
27.2 mi
105 East South Boulevard
Crawfordsville, IN
Closed
Opens 7:30 AM Sat
Call
Shop Image

Deakins Precision Automotive

4.8
(385)
33.27 mi
703 Lafayette Avenue
Lebanon, IN
Closed
Opens 7:30 AM Mon
Call
Shop Image

Midas - Lebanon

4.7
(9)
33.57 mi
425 Ransdell Road
Lebanon, IN
Closed
Opens 7:30 AM Sat
Call
Shop Image

Autopotenza West

4.7
(81)
44.77 mi
7845 Indianapolis Road
Zionsville, IN
Closed
Opens 8:00 AM Mon
Call
Shop Image

Christian Brothers Automotive - Zionsville

4.5
(191)
47.34 mi
10860 North Michigan Road
Zionsville, IN
Closed
Opens 7:00 AM Mon
Call
Shop Image

Joe's Auto Service - Carmel

4.6
(83)
49.89 mi
811 W Main St
Carmel, IN
Closed
Opens 8:00 AM Mon
Call
Shop Image

Christian Brothers Automotive - Eagle Township

4.9
(10)
43.23 mi
6481 Mills Drive
Whitestown, IN
Closed
Opens 7:00 AM Mon
Call

Fuel Evaporative Canister Replacement

How are fuel evaporative canister issues diagnosed?

When the EVAP system is checked, the purge valve and vent valve are closed, and the pressure is monitored by the fuel pressure sensor. If that pressure drops with both valves closed, there is a leak in the EVAP system. If pressure holds properly, the system passes, and will continue to prevent vapor emissions. The sensor is also used in testing vent valve and purge valve operation. When the valves are open, the pressure sensor reads the fuel tank pressure, and must sense a drop in pressure. If not, the purge valve or vent valve may be faulty.
Fuel Evaporative Canister Replacement

How is a fuel evaporative canister replaced?

When the identified component is faulty, the technician will remove all electrical and vacuum connectors, clean the mating surface for the faulty part, and install a new part. The evap system will then be allowed to run self-diagnostics to test the repair. If additional leaks are present, or other components have failed, the test will fail, and the process will restart.

RepairPal Recommendations for fuel evaporative canister issues

To help prevent issues with the EVAP system, especially the charcoal canister, avoid overfilling or topping off the fuel tank. When the tank is topped off, the charcoal canister may fill with fuel, causing system failure, and degradation of the charcoal canister.

What to look out for when dealing with fuel evaporative canister issues

Many people like to remove EVAP components, but there is nothing to benefit from removal. The system is there to prevent harmful emissions, and increase fuel mileage in the process. When working with fuel, the battery should always be disconnected, and proper precautions taken against fire hazards.

Can I replace the fuel evaporative canister myself?

The EVAP system is best serviced by an experienced DIYer, or a professional technician. Repairing the EVAP system can be a struggle, but with proper understanding the job becomes enjoyable. The biggest mistake is to being changing parts based on hunches and misdiagnosis. That is where this job becomes more expensive than bringing the problem to a professional.

Fuel Evaporative Canister Replacement Cost Estimates