Close

Mercedes-Benz Sprinter 2500 Questions

Get answers to your auto repair and car questions. Ask a mechanic for help and get back on the road.

Find questions for your car.
The catalytic converter and DPF has been replaced new OEM parts($) and the P242f codekeep coming back in about every 200 miles.
I stop for fuel it’s diesel came back went to start it ignition lights up everything lights up but it will not turn over if I leave the key on and go short the starter it turns over just fine nice and fast all the lights are bright but it won’t turn over with the key at all it won’t it won’t start if even if I crank the starter from underneath
There is no throttle respond, will only go 10 mph
MY A/C WORKS FINE IN THE BACK, BUT THE FRONT DOESN'T. IF I DISCONNECT THE PLUG IN TO THE FRONT I HAVE 13.4 VOLTS. THEN WHEN I CONNECT IT WON'T HAVE POWER. IF I DISCONNECT AND FEED POWER TO THE COMPRESSOR, THE COMPRESSOR, THE SYSTEM WILL COME COLD. WHAT COULD IT BE.
What seems to make the problem better or worse? No power when plug in. Power when I DISCONNECT from w/o.
How long have you had this problem? About a month.
Worked great for years. Suddenly will not start. Replaced w 25 amp fuse. Runs for a while the problem recurs. Maint shop placed a fuse that can reset itself in the 23 slot. Van works reat but on occasion have to retry a start to get the van going. The electrical system seems a little off once this fuse reboot initiated. Concerned may fry electrical system.
My ac fan not COMING on IS it a fuse?
Dpf is cleaned and empty no soot,codes won't clear ,down to zero starts left,need to know
How to reset,have alter scanner
"Add blue" indication and the DEF sensor has been replaced each time. What can be the problem? Is this a software issue!
I just got a break flush performed by a MB dealer. I have done break flushes in many cars in my lifetime but not in a sprinter. When doing a flush do you still have to bleed calipers from the farthest back?
I noticed that my wheels were not taken off and went underneath and the caliper was not touched. Break dust was not disturbed.

Get an estimate and never overpay again
RepairPal guarantees your repair will be done right.