What is your question?
·
·
What is your question?
I'm getting ready to change the lower arm bushings on my 2006 Ranger Rover Sport and noticed that I have to dismantle the air suspension. Since I'm not very familiar with air suspensions, I was wondering if I need to be aware of any specific pre and post instructions for the proper disconnection and operation of the air suspension (after i replace the lower arm bushing). The bushings are worn out (because of 22" wheels) and I need to replace them ASAP. I can use any advise you can give me. Thank you.
1 Reply
These job requires few special tools, including the bushing tool. It's safer to do it from a lift. I'd suggest to take it to a Rover specialty shop. If you definitely want's to do it yourself I can send you instructions, but you need to post an e-mail. Zee
Hi Zee, Thanks for the reply and the info. My email address is ardessintl@cox.net. I appreciate your help and instructions. Sy
Check your e-mail, please. Be careful and double check everything, make sure all the fasteners are torqued to specs. Good luck with the repair. Zee
Will do. Thanks.