P2476 OBD-II: Exhaust Gas Temperature Sensor Circuit High
P2476 Severity
Will P2476 go away on its own?
Once the vehicle's onboard system no longer detects the issue, most codes will disappear on their own. If your vehicle still has this code, however, it should be properly diagnosed to avoid a more serious problem.
For a proper diagnosis, RepairPal Certified shops have the equipment, tools, and expertise.
Moderate severity codes might not threaten the vehicle's safety or functionality immediately, but you should still get it diagnosed within a reasonable time frame to keep your car running well.
What causes OBD-II fault code P2476?
Diesel Exhaust Fluid (DEF) is used to assist in converting leftover exhaust particles to harmless gases. In order to burn off those particles, the temperature of the exhaust system needs to increase. the injection of DEF Fluid into the exhaust stream brings Diesel Particulate Filter (DPF) up to temperature. The system is then able to convert harmful NOx to Nitrogen, Carbon Dioxide, and water. The Reductant Catalyst (SRC) was added to further reduce any NOx was still in the exhaust stream. The Exhaust Gas Temperature (EGT) Sensor tells the engine control module (PCM) the temperature of the exhaust gas going into and out of the Selective Catalytic Reduction (SCR). If the PCM detects an implausible signal from the EGT sensor, it will store code P2476.
Need a P2476 diagnosis? Trust our experts.
Tuffy Tire & Auto Service Center - Grandview
Excite Auto Repair & Towing
All In Auto Service
Tuffy Tire & Auto Service - Grove City
OBD II Fault Code
- OBD II P2476
OBD-II Code Powertrain Control Module (PCM) failure is defined as a Exhaust Gas Temperature Sensor Circuit High
Diesel Exhaust Fluid (DEF) is used to assist in converting leftover exhaust particles to harmless gases. In order to burn off those particles, the temperature of the exhaust system needs to increase. the injection of DEF Fluid into the exhaust stream brings Diesel Particulate Filter (DPF) up to temperature. The system is then able to convert harmful NOx to Nitrogen, Carbon Dioxide, and water. The Reductant Catalyst (SRC) was added to further reduce any NOx was still in the exhaust stream. The Exhaust Gas Temperature (EGT) Sensor tells the engine control module (PCM) the temperature of the exhaust gas going into and out of the Selective Catalytic Reduction (SCR). If the PCM detects an implausible signal from the EGT sensor, it will store code P2476.
Common Problems That Trigger the P2476 Code
- Exhaust Gas Temperature (EGT) sensor failure
- Powertrain Control Module (PCM) failure
- Wiring issue
Ask our experts about P2476.
RepairPal Car Genius™ is a free resource for vehicle owners seeking advice on maintenance, auto repair, shop inquiries, estimates, and finding a trustworthy repair shop in your area.
Call us at 877-913-1554
Available 9am – 6pm ET Monday through Friday