OBD II Fault Code

  • OBD II P2463

    OBD-II Code Powertrain Control Module (PCM) software needs to be updated is defined as a Diesel Particulate Filter Restriction - Soot Accumulation

    Diesel Exhaust Fluid (DEF) is used to assist in converting leftover exhaust particles to harmless gases. In order to burn off those particles, the temperature of the exhaust system needs to increase. the injection of DEF Fluid into the exhaust stream brings Diesel Particulate Filter (DPF) up to temperature. The system is then able to convert harmful NOx to Nitrogen, Carbon Dioxide, and water. The Reductant Catalyst (SRC) was added to further reduce any NOx was still in the exhaust stream. The engine computer (PCM) monitors the exhaust pressure before and after the Diesel Particulate Filter (DPF). Excessively high pressures on the inlet side indicate a restriction on the DPF. The PCM will set code P2463. The PCM may also limit power available from the engine to prevent damage to additional components.

    Common Problems That Trigger the P2463 Code

    • Diesel Particulate Filter (DPF) failure
    • Manual DPF regeneration must be completed
    • Powertrain Control Module (PCM) failure
    • Powertrain Control Module (PCM) software needs to be updated

    Not the OBD-II Code You're Looking For?

    No comments yet...

    Sign in to comment