2018 Land Rover Range Rover Engine Is Stalling

Common Causes of Engine Stalling in Your 2018 Land Rover Range Rover and How to Resolve Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Fuel System
0%
15% chance it's the
Air Intake System
0%
55% chance it's
Something else
The most common reasons a 2018 Land Rover Range Rover engine is stalling are the fuel system, the air intake system, or the ignition system.
  • Fuel System: A clogged fuel filter or failing fuel pump can restrict fuel flow, resulting in poor engine performance and starting issues.
  • Air Intake System: A dirty or damaged air filter or a malfunctioning mass airflow sensor can restrict airflow, leading to reduced engine performance and efficiency.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2018 Land Rover Range Rover engine is stalling?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If the MAF sensor sends an erroneous signal, a few things happen. The engine's computer will trigger the check engine light, and the on-board diagnostic (OBD) trouble codes will reflect the airflow discrepancy noted by the MAF sensor. Depending on the reported volume of air, the engine may try to compensate for these conditions, causing the engine to burn excessive amounts of fuel and emit black smoke from the exhaust. In this case, the OBD trouble codes would also reference faults recognized by the exhaust oxygen sensors. The engine may also have issues with idling roughly, failing to start, stalling, hesitation, power loss, misfires, and fuel consumption.

»MORE: Signs of a failing mass airflow sensor

A faulty oxygen sensor is one of the most common causes of a check engine light. Symptoms may include a decrease in fuel mileage, hesitation or misfiring from the engine, rough idling or even stalling. A faulty sensor may cause the vehicle to fail an emissions test.

Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.

The most likely symptom of a faulty fuel temperature sensor is a check engine light. When the sensor goes bad, the Engine Control Module signals the driver that there is a problem by turning on the dash light. Poor fuel economy might also be noticed. In some cases, a failing fuel temperature sensor could lead to hard starting of the engine or an engine misfire and poor performance.

When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.

What diagnostic steps should be taken to address the stalling issue in a 2018 Land Rover Range Rover?

When addressing the stalling issue in a 2018 Land Rover Range Rover, it's essential to adopt a methodical diagnostic approach. Start by utilizing a diagnostic scanner to check for any error codes stored in the vehicle's computer system, as this can quickly highlight specific problems. Next, inspect the fuel system components, including the fuel pump, filter, and injectors, to ensure that fuel is being delivered efficiently to the engine. Following this, examine the ignition system, focusing on spark plugs and ignition coils, to confirm they are functioning properly. It's also crucial to test the battery and charging system to ensure they are providing adequate power. Don’t overlook the air intake system; check for blockages or leaks that could hinder engine performance. Additionally, assess the engine sensors, such as the mass airflow and oxygen sensors, to ensure they are relaying accurate information to the engine control module. Finally, inspect the throttle body and exhaust system for any issues that could affect engine operation. By systematically following these steps, you can effectively diagnose and address the stalling issue, ensuring your Range Rover runs smoothly.

What are the common problems that could cause the engine to stall in a 2018 Land Rover Range Rover?

When diagnosing engine stalling in a 2018 Land Rover Range Rover, it's essential to consider several common problems that could be at play. One of the primary culprits is the fuel system, where issues like a clogged fuel filter or a failing fuel pump can disrupt the flow of fuel to the engine, leading to stalling. Additionally, electrical problems, such as a malfunctioning ignition coil or faulty sensors, can interrupt the engine's operation. Airflow blockages, often caused by a dirty air filter or a defective mass airflow sensor, can also hinder the proper air-fuel mixture necessary for smooth engine performance. Furthermore, malfunctions in the ignition system, including worn spark plugs or a faulty ignition module, can prevent the engine from firing correctly. Lastly, vacuum leaks can create an imbalance in the air-fuel mixture, exacerbating stalling issues. By understanding these potential problems, DIYers can take proactive steps to maintain their vehicle and address any issues before they lead to more significant complications.

How urgent is it to address the engine stalling issue in a 2018 Land Rover Range Rover?

When dealing with engine stalling in a 2018 Land Rover Range Rover, the urgency of addressing the issue cannot be overstated. Stalling can lead to a sudden loss of power, especially in critical driving situations such as merging onto highways or navigating busy intersections, which poses a significant safety risk not only to the driver but also to other road users. Additionally, frequent stalling can result in frustrating experiences and the possibility of being stranded, which can be particularly inconvenient for those who rely on their vehicle for daily activities. Beyond the immediate safety concerns, neglecting this issue can lead to more severe damage to the engine and its components, potentially resulting in costly repairs that could have been avoided with timely intervention. For DIY enthusiasts, understanding the importance of regular maintenance and prompt repairs is crucial, as it not only enhances the vehicle's performance but also ensures its longevity. Therefore, addressing engine stalling issues as soon as they arise is essential for maintaining safety, performance, and cost-effectiveness in the long run.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.