2014 Land Rover Range Rover Tire Pressure Warning Light Stays On

Resolve Tire Pressure Warning Light in 2014 Land Rover Range Rover: Causes and Solutions

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2014 Land Rover Range Rover tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2014 Land Rover Range Rover tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What are the initial steps to diagnose a persistent tire pressure warning light on a 2014 Land Rover Range Rover?

When faced with a persistent tire pressure warning light on your 2014 Land Rover Range Rover, it's essential to adopt a systematic diagnostic approach. Start by checking the tire pressures of all tires, including the spare, ensuring they meet the manufacturer's recommended levels. If the pressures are low, inflate them accordingly and monitor if the warning light resets after a short drive. Next, inspect the tire pressure monitoring system (TPMS) sensors for proper functionality, as faulty sensors can trigger the warning light. Utilize a TPMS tool to verify that the sensors are operating at the correct frequency of 315 MHz. If the sensors are functioning but the light remains on, consider the positioning of the sensors; driving the vehicle above 12.5 mph for several minutes can help the system auto-locate them. Additionally, check for any specific error messages on the dashboard, as these can provide clues about whether the issue is isolated to one tire or indicative of a broader system fault. Inspect the TPMS antenna and connectors for signs of water damage or corrosion, as these can disrupt the system's performance. If the problem persists, using a Land Rover-approved diagnostic tool can help identify any fault codes related to the TPMS module or sensors. Finally, if applicable, attempt to reset the TPMS system using an OBD relearn procedure, which may involve driving the vehicle for a few minutes after activation. By following these steps, you can effectively diagnose and potentially resolve the tire pressure warning light issue, ensuring your vehicle remains safe and roadworthy.

What could be causing the tire pressure warning light to remain on in a 2014 Land Rover Range Rover?

When the tire pressure warning light stays on in your 2014 Land Rover Range Rover, it can be frustrating, but understanding the common problems can help you troubleshoot effectively. One of the first things to check is the tire pressure itself; ensure all tires are inflated to the recommended levels, particularly when they are cold, as incorrect pressure is a frequent culprit. If the tires are fine, consider the possibility of TPMS sensor issues, especially if any sensors have been replaced recently. In such cases, the system may require a reset or a relearning process, which can sometimes be achieved by simply driving the vehicle for a short distance. Additionally, be aware of potential faults within the Tire Pressure Monitoring System itself, which may be indicated by a specific error message on your dashboard. If you suspect a software issue, particularly due to a recall affecting the TPMS in your model year, visiting a Land Rover dealership for a Body Control Module update could resolve the problem. Lastly, if you have access to a car scanner, it can be beneficial to check for any diagnostic codes related to the TPMS, as this may provide further insight into the issue. By systematically addressing these common problems, you can often resolve the tire pressure warning light issue without needing professional assistance.

What immediate steps should be taken if the tire pressure warning light remains on in a 2014 Land Rover Range Rover?

When the tire pressure warning light remains illuminated in your 2014 Land Rover Range Rover, it is crucial to act promptly to avoid safety hazards and potential damage to your vehicle. Ignoring this warning can lead to tire blowouts, compromised handling, and increased wear on your tires, which can ultimately result in costly repairs. Start by checking the tire pressures to ensure they are at the recommended levels, as under-inflated tires can significantly affect your vehicle's performance and safety. If the pressures are correct, consider verifying the TPMS sensors, especially if you've recently changed tires or sensors, as they may need to be reset or localized. Additionally, inspect for any visible tire damage, such as punctures, which could also trigger the warning light. If the light persists, it may indicate a deeper issue within the TPMS or ABS systems, necessitating further investigation. Remember, timely attention to this warning not only enhances your safety on the road but also helps maintain the longevity of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.