The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2013 INFINITI FX37, begin with a straightforward approach that prioritizes simpler solutions before delving into more complex diagnostics. Start by manually checking the tire pressure in all four tires using a reliable tire pressure gauge, ensuring that the readings align with the recommended PSI found in your owner's manual or on the driver's side door jamb sticker. Next, conduct a thorough visual inspection of each tire for any signs of damage, such as punctures, cuts, or bulges, and check for any foreign objects that may be lodged in the treads, as these could lead to air leaks. If the tire pressure appears correct and the tires are in good condition, consider resetting the Tire Pressure Monitoring System (TPMS) according to the instructions provided in your owner's manual, as this can sometimes resolve temporary warning light issues. However, if the warning light remains illuminated after these steps, it may indicate a more serious problem, such as a faulty sensor or other underlying issues, at which point consulting a professional mechanic or dealership for a comprehensive diagnosis and repair is advisable. By following this methodical approach, you can efficiently address the tire pressure warning light concern while ensuring the safety and performance of your vehicle.
When the tire pressure warning light stays on in your 2013 INFINITI FX37, it’s crucial to identify the underlying issues to ensure your safety and vehicle performance. The most frequent cause is low tire pressure, which can be easily checked and adjusted to the recommended levels. If the pressure is adequate, consider the possibility of a faulty tire pressure sensor that may need replacement. Additionally, the tire pressure monitoring system might require recalibration to provide accurate readings, a process that can often be done by following the manufacturer’s instructions. Electrical faults within the system can also lead to the warning light remaining illuminated, so a thorough diagnosis is essential to pinpoint and repair any issues. Lastly, check for any external interference or obstructions around the sensors, as these can disrupt their functionality. By systematically addressing these common problems, you can effectively troubleshoot and resolve the tire pressure warning light issue in your vehicle.
Addressing the tire pressure warning light in your 2013 INFINITI FX37 is not just a matter of convenience; it is a critical safety issue that demands immediate attention. Ignoring this warning can lead to serious consequences, including compromised vehicle handling and increased risk of accidents due to poor traction and braking performance. Additionally, driving on underinflated tires can accelerate tire wear, leading to costly replacements and the potential for dangerous blowouts while on the road. Furthermore, neglecting to maintain proper tire pressure can significantly impact your vehicle's fuel efficiency, resulting in higher fuel costs over time. Therefore, it is essential to check your tire pressure as soon as the warning light activates, inflate the tires to the manufacturer’s recommended levels, and investigate any underlying issues that may be causing the alert. Regular monitoring and maintenance of tire pressure not only enhance your vehicle's performance but also ensure your safety and that of others on the road.
See what others are asking about their INFINITI FX37. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other INFINITI FX37 drivers like you.