2017 Hyundai Santa Fe Tire Pressure Warning Light Stays On

Resolve Tire Pressure Warning Light in 2017 Hyundai Santa Fe

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2017 Hyundai Santa Fe tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2017 Hyundai Santa Fe tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue in my 2017 Hyundai Santa Fe?

To effectively diagnose the tire pressure warning light issue in your 2017 Hyundai Santa Fe, begin with the simplest and most straightforward step: checking the tire pressure. Use a reliable tire pressure gauge to measure the pressure in all four tires, ensuring that each tire is inflated to the recommended PSI, which can be found in your owner's manual or on the sticker located on the driver's side door jamb. If you discover that any tires are under-inflated, fill them to the appropriate level, as low pressure is a common cause of the warning light activation. Next, conduct a visual inspection of each tire for any signs of damage, such as punctures, cuts, or bulges, which could indicate a more serious issue. If the tires appear to be in good condition and the pressure is correct, you may need to reset the tire pressure monitoring system (TPMS) to clear the warning light; refer to your owner's manual for specific reset instructions. Finally, take your vehicle for a short drive to allow the system to recalibrate, as this may help turn off the warning light. By following these steps, you can efficiently diagnose and resolve the tire pressure warning light issue, ensuring your vehicle remains safe and roadworthy.

What could be causing the tire pressure warning light to stay on in a 2017 Hyundai Santa Fe?

When the tire pressure warning light stays on in a 2017 Hyundai Santa Fe, it can signal several common issues that DIYers can troubleshoot. The most frequent cause is low tire pressure, so the first step is to check and inflate your tires to the recommended levels. If the pressure is adequate, the problem might stem from a faulty tire pressure sensor, which may need replacement if it’s malfunctioning. Additionally, sensor calibration issues can occur, requiring a recalibration to ensure accurate readings. Electrical faults within the tire pressure monitoring system can also trigger the warning light, and these may necessitate the use of diagnostic tools to pinpoint the issue. Furthermore, be aware that temperature changes can affect tire pressure readings, so it’s best to check your tires when they are cold for the most accurate measurement. If you’ve addressed these common problems and the warning light remains illuminated, it’s wise to consult a qualified mechanic for further diagnosis.

What should I do if the tire pressure warning light on my 2017 Hyundai Santa Fe stays on?

If the tire pressure warning light on your 2017 Hyundai Santa Fe remains illuminated, it is crucial to act promptly to avoid potential safety hazards and costly repairs. Ignoring this warning can lead to decreased vehicle performance, increased tire wear, and even tire blowouts, which pose serious risks while driving. Start by checking the tire pressure in all four tires, including the spare, to ensure they are inflated to the recommended levels found in your owner's manual. If you discover any tires are underinflated, use a tire pressure gauge to accurately inflate them to the correct pressure. Additionally, inspect each tire for visible damage, such as punctures or cuts, as these can compromise tire integrity and safety. After adjusting the tire pressure, you may need to reset the tire pressure monitoring system, which can typically be done through your vehicle's settings menu. If the warning light persists despite these efforts, it is essential to seek professional assistance, as there may be a deeper issue with the tire pressure monitoring system that requires expert diagnosis. Taking these steps not only ensures your safety on the road but also helps maintain the longevity of your tires and vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.