The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure light issue on your 2013 Hyundai Genesis, begin by checking the tire pressure of all four tires, ensuring they are inflated to the recommended levels indicated on the tire information placard or in your owner's manual. If the tires are under-inflated, inflate them accordingly, as this is often the simplest fix. Next, if you inflate the tires while the vehicle is powered on, the Tire Pressure Monitoring System (TPMS) sensors may provide real-time updates, allowing you to confirm that the pressures are being accurately read. After adjusting the tire pressures, take your Genesis for a short drive of about 8-10 miles; this can help the TPMS recalibrate and potentially turn off the warning light. If the light remains illuminated, inspect the tires for any leaks or damage, as a tire that cannot hold air will trigger the TPMS warning. Should the pressures be correct and no leaks found, the issue may lie with the TPMS sensors themselves, which could be malfunctioning or have dead batteries. In this case, a visit to a tire shop for a sensor scan may be necessary. Additionally, pay attention to whether the TPMS light is blinking or solid, as a blinking light often indicates a system malfunction. If all else fails, consult your owner's manual for specific troubleshooting steps or seek assistance from a professional mechanic for a thorough diagnosis.
When the tire pressure monitoring system (TPMS) light remains on in your 2013 Hyundai Genesis, it can be frustrating, especially after checking the obvious issues. One common problem is incorrect tire pressure; even slight deviations from the recommended levels can trigger the light. For instance, if your tires are slightly overinflated due to heat from driving, the system may not register this correctly. Additionally, failing or faulty TPMS sensors can lead to inaccurate readings, often due to degrading batteries within the sensors. Interference from aftermarket components, such as electronic devices, can also disrupt the TPMS functionality. Another factor to consider is the spare tire; if it has a TPMS sensor that is not properly programmed, it could cause the light to stay on. Temperature fluctuations can further complicate matters, as they affect tire pressure and may require adjustments to keep the light off. If you've recently replaced a sensor or rotated your tires, the TPMS may need a relearn process to recalibrate correctly. Lastly, underlying electrical issues within the TPMS system may necessitate professional diagnosis. By systematically checking these potential problems, you can effectively troubleshoot the TPMS light issue in your Hyundai Genesis.
Addressing the tire pressure light issue in your 2013 Hyundai Genesis is of utmost urgency due to the significant safety risks it poses. When the tire pressure monitoring system (TPMS) light illuminates, it serves as a critical warning that one or more tires may be underinflated, which can lead to dangerous situations such as tire blowouts, especially at high speeds. This not only jeopardizes your safety but also affects the overall performance of your vehicle, as underinflated tires can compromise handling and stability, making your car less responsive and harder to control. Furthermore, neglecting this warning can lead to more severe problems, including tire damage that may result in costly repairs. If the light remains on after checking and adjusting the tire pressure, it may indicate a malfunctioning sensor, which requires immediate attention to prevent further complications. Therefore, it is essential to take prompt action to ensure your safety and maintain the integrity of your vehicle.
See what others are asking about their Hyundai Genesis. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Hyundai Genesis drivers like you.
