GMC Savana 3500 Tire Pressure Warning Light Stays On

Common Causes for the Tire Pressure Warning Light in Your GMC Savana 3500 and How to Resolve Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a GMC Savana 3500 tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a GMC Savana 3500 tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

Troubleshooting Tire Pressure Warning Light in a GMC Savana 3500

When troubleshooting the tire pressure warning light in a GMC Savana 3500, start by checking the tire pressure in all four tires, ensuring they are inflated to the recommended levels found in the owner's manual or on the driver's side door sticker. This simple step can often resolve the issue without further intervention. If the light persists after confirming proper tire pressure, consider using a TPMS relearn tool, especially if you've recently replaced a tire or sensor. To reset the TPMS sensor, locate the reset button, hold it until the warning light blinks three times, and then start the vehicle, allowing about 20 minutes for the system to recalibrate. If the light continues to illuminate, it may indicate a fault with the tire pressure sensor itself, necessitating a more thorough diagnosis. Always remember that a flashing TPMS light signals an urgent issue, so regularly verifying tire pressure with a gauge is essential for safe driving. By following these steps, you can effectively address the tire pressure warning light and maintain your vehicle's safety and performance.

Troubleshooting Tire Pressure Warning Light in GMC Savana 3500

When troubleshooting the tire pressure warning light in your GMC Savana 3500, it's crucial to recognize the common problems that can trigger this alert. One of the most prevalent issues is low tire pressure, which can result from temperature fluctuations or slow leaks. Begin by checking the pressure in all tires, including the spare, and ensure they are inflated to the manufacturer's recommended levels. Another frequent concern is a malfunctioning tire pressure monitoring system (TPMS) sensor, which may need resetting or replacement if it fails to provide accurate readings. If you've recently changed a tire or wheel, the TPMS may require recalibration to recognize the new sensor. Additionally, the warning light could indicate more serious issues, such as a damaged tire or a fault within the TPMS system itself. By understanding these potential problems, you can effectively diagnose and resolve the tire pressure warning light, ensuring your vehicle remains safe and roadworthy.

Why is the Tire Pressure Warning Light Staying On in a GMC Savana 3500?

When the Tire Pressure Warning Light remains illuminated in your GMC Savana 3500, it is crucial to address the issue without delay. Ignoring this warning can lead to serious safety risks, such as reduced vehicle control and increased likelihood of tire blowouts, which can result in accidents. Common culprits for the light staying on include leaking tires, improper inflation, or a malfunctioning tire pressure monitoring system (TPMS). To ensure your safety, start by visually inspecting each tire for signs of damage or leaks, and use a tire pressure gauge to confirm that all tires are inflated to the manufacturer's recommended levels. If the tires are in good condition and properly inflated, the next step is to examine the TPMS for any faults, as a damaged sensor can trigger the warning light even when tire pressure is adequate. By taking these proactive measures, you not only enhance your safety on the road but also prevent potential damage to your vehicle, making it essential to act swiftly when the Tire Pressure Warning Light stays on.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.