Due to a failed resistor pack, the HVAC fan may only operate on the high speed setting.
Problem Description and Possible Solution
3 people reported this problem
Porsche
944
Comments
Viewing 1 - 1 of 1 comments
Related Items:
Due to a broken plastic link at the servo motor for the heater control flap, the interior te...
Verified for the Porsche 9443 reports
In automatic transmissions, the flexible hub at the engine flywheel may deteriorate and fail...
Verified for the Porsche 9442 reports
The front hood and rear deck lid support struts may fail; replacement is required.
Verified for the Porsche 9441 report
Engine shut down or a "No Start" may be caused by cracks at the DME (fuel pump) relay solder...
Verified for the Porsche 9442 reports
Suggested Articles
Related Content
Most Recent Porsche 944 Problems
- Inspect CV Boots and Joints at Each Service
- Failed Resisor Pack Causing High Speed Only On Interior Fan
- Suspension components require regular inspection
- Timing belt inspection and adjustment
- Aged brake fluid causing problems
- Timing belt damage due to oil leaks
- Low boost due to corrosion at throttle pisition sensor
- "No start" Caused By Failed Fuel Pump Relay
- Engine misfire due to intake manifold air leak
- Clutch problems may develop due to contaminated fluid
- Overfilled differential due to leaking automatic transmission
- Erratic Interior Temperature Due to Broken Link at Servo Motor
- Engine Oil Leaks May Cause the Flesible Hub at the Engine Flywheel to Fail
- Driveshaft Bearings May Become Noisy
- Failed Hood and Deck Lid Supports
Porsche 944 Estimates
- Ignition Coil Replacement ($251 - $286) in Walterboro, SC
- Brake Caliper Replacement - Front ($331 - $1,320) in Mount Vernon, OR
- Spark Plug Replacement ($77 - $102) in Iberia, MO
- Brake Rotor Replacement ($546 - $807) in Shawanese, PA
- Air Conditioning Expansion Valve Replacement ($393 - $452) in Lawrence, PA
- Engine Control Module (ECM) Replacement ($1,846 - $1,859) in Lorton, VA