The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2018 Dodge Challenger, begin with a straightforward approach that prioritizes simpler solutions before delving into more complex diagnostics. Start by checking the tire pressure in all four tires using a reliable tire pressure gauge, ensuring they are inflated to the levels recommended in your vehicle's manual. This initial step can often resolve the warning light if the pressure is simply low. Next, conduct a visual inspection of the tires for any signs of damage, such as punctures or bulges, which could indicate a leak. Don’t overlook the valve stems; inspect them for any cracks or leaks that might be contributing to pressure loss. If everything appears normal, consider resetting the tire pressure monitoring system (TPMS) as it may require recalibration. Refer to your vehicle's manual for specific reset instructions. If the warning light remains illuminated after these checks, it may be time to consult a professional mechanic for a thorough diagnosis, as there could be underlying issues that require expert attention. By following this methodical approach, you can efficiently address the tire pressure warning light and ensure your vehicle's safety on the road.
When the tire pressure warning light stays on in a 2018 Dodge Challenger, it can indicate several underlying issues that need attention. The most common reason is low tire pressure, which can result from natural air loss or punctures; therefore, regularly checking and inflating your tires to the recommended levels is crucial for safety and performance. Another possibility is a faulty tire pressure sensor, which may require replacement if it is not functioning correctly. Additionally, the sensors might need recalibration, particularly after tire rotations or replacements, to ensure they provide accurate readings. Electrical issues within the tire pressure monitoring system can also cause the warning light to remain illuminated, so inspecting the wiring and connections for faults is advisable. Lastly, a simple system reset through the vehicle's onboard computer can sometimes clear the warning light. By addressing these common problems, you can effectively troubleshoot and resolve the tire pressure warning light issue in your Dodge Challenger, ensuring a safer driving experience.
When the tire pressure warning light on your 2018 Dodge Challenger remains illuminated, it is crucial to take immediate action. Ignoring this warning can lead to serious safety risks, as improper tire pressure significantly affects vehicle handling and braking capabilities, increasing the likelihood of accidents. Additionally, driving on underinflated tires can cause uneven wear, shortening their lifespan and potentially resulting in a dangerous blowout. Furthermore, low tire pressure can negatively impact your fuel efficiency, leading to higher fuel costs over time. Lastly, a persistent warning light may indicate a malfunction in the Tire Pressure Monitoring System (TPMS), which requires attention to ensure the system functions correctly. Therefore, addressing the tire pressure warning light without delay is essential for maintaining safety, optimizing vehicle performance, and preventing costly repairs.
See what others are asking about their Dodge Challenger. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Dodge Challenger drivers like you.
