The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2016 Dodge Challenger, begin with a straightforward approach that prioritizes simpler solutions before delving into more complex diagnostics. Start by manually checking the tire pressure of all four tires, ensuring they are inflated to the manufacturer’s recommended levels, as low pressure is a frequent trigger for the warning light. Next, conduct a visual inspection of the tires for any signs of damage, such as punctures or bulges, which could lead to air loss. If the tire pressure appears normal and no visible damage is found, consider resetting the vehicle's control modules by disconnecting the battery for approximately 20 minutes; this can sometimes resolve false alerts from the tire pressure monitoring system (TPMS). As you monitor the warning light, take note of any patterns in its activation, especially if it reappears during or after driving, as this may indicate a persistent issue. Lastly, if low pressure is indicated in one or more tires, the TPMS sensors may be functioning correctly by alerting you to a genuine problem. By following this methodical approach, you can effectively identify and address the underlying cause of the tire pressure warning light on your Challenger.
When dealing with a tire pressure warning light that remains illuminated in a 2016 Dodge Challenger, it's essential to understand the common problems that could be at play. One of the primary culprits is low tire pressure, which can occur due to punctures, leaks, or simply the natural loss of air over time. Additionally, a faulty tire pressure sensor may misread the actual tire pressure, causing the warning light to trigger even when the tires are adequately inflated. It's also worth considering that the sensors have batteries that can deplete, leading to malfunctions. Furthermore, issues with wiring or connections within the tire pressure monitoring system can result in persistent warning lights, often due to damaged wires or loose connections. In some cases, the system may require recalibration to ensure it provides accurate readings. Lastly, colder weather can cause tire pressure to drop, which might activate the warning light if the tires were inflated in warmer conditions. By identifying and addressing these potential issues, you can effectively troubleshoot the tire pressure warning light in your Dodge Challenger.
Addressing the tire pressure warning light on a 2016 Dodge Challenger is an urgent matter that should not be overlooked. Ignoring this warning can lead to serious safety concerns, as low tire pressure significantly impacts vehicle handling and braking, increasing the likelihood of accidents, particularly in critical driving situations. Furthermore, driving on underinflated tires accelerates uneven wear, which can necessitate costly premature tire replacements. The financial implications extend beyond tire costs; underinflated tires also reduce fuel efficiency, leading to higher fuel expenses over time. Additionally, prolonged neglect of low tire pressure can result in tire damage, raising the risk of a blowout while driving. Therefore, it is crucial to promptly check and inflate your tires to the recommended levels and to investigate any underlying issues with the tire pressure monitoring system. Regular maintenance of tire pressure is essential not only for your safety but also for the longevity and efficiency of your vehicle.
Read about related problems experienced by other Dodge Challenger drivers like you.
See what others are asking about their Dodge Challenger. Get answers from RepairPal's community of auto experts and enthusiasts.
