The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2012 Dodge Challenger, begin with a straightforward approach by checking the tire pressure of all four tires. Ensuring that each tire is inflated to the manufacturer's recommended levels is crucial, as low pressure is a common trigger for the warning light. Next, inspect the tires for any visible signs of damage or leaks, such as nails or punctures, which could also illuminate the warning light. After addressing these initial checks, examine the Tire Pressure Monitoring System (TPMS) sensors on each tire; a malfunctioning sensor, often due to a dead battery, can lead to persistent warning lights. If everything appears in order, consider resetting the TPMS system according to your vehicle's manual, as this can sometimes clear the warning. However, if the light remains illuminated after these steps, it may be time to consult a professional mechanic or tire shop for a more thorough diagnosis. By following this methodical approach, you can efficiently identify and resolve the issue with your tire pressure warning light.
When the tire pressure warning light remains on in a 2012 Dodge Challenger, it can be frustrating for any DIY car owner. One of the most frequent culprits is low tire pressure, which can easily be checked and adjusted using a tire pressure gauge. If the pressure is within the recommended range and the light persists, the issue may lie with a faulty tire pressure sensor. These sensors can malfunction over time, necessitating replacement to restore proper functionality. Additionally, sensor calibration issues can arise, requiring a recalibration process to ensure accurate readings. Electrical problems, such as damaged wiring or blown fuses, can also trigger the warning light, so a thorough inspection of the vehicle's electrical system is advisable. Lastly, if all else fails, performing a system reset on the tire pressure monitoring system may clear any false alerts. By systematically addressing these common problems, you can effectively troubleshoot and resolve the tire pressure warning light issue in your Challenger, ensuring a safer driving experience.
Addressing the tire pressure warning light in a 2012 Dodge Challenger is crucial for maintaining both safety and vehicle performance. When this warning light remains illuminated, it signals that one or more tires may be underinflated, which can significantly compromise handling and braking capabilities. This poses a serious safety risk, particularly in emergency situations where quick response is essential. Additionally, driving on underinflated tires can lead to uneven wear, resulting in the need for premature tire replacements, which can be costly. Furthermore, low tire pressure negatively impacts fuel efficiency, leading to increased fuel consumption and higher expenses over time. Ignoring this warning can also result in tire damage, increasing the likelihood of a blowout while driving. Therefore, it is imperative to check and adjust tire pressure according to the manufacturer's specifications as soon as the warning light activates, ensuring both safety and optimal vehicle performance.
Read about related problems experienced by other Dodge Challenger drivers like you.
See what others are asking about their Dodge Challenger. Get answers from RepairPal's community of auto experts and enthusiasts.
