2017 Chevrolet Trax Tire Pressure Warning Light Stays On

Resolve the Tire Pressure Warning Light in Your 2017 Chevrolet Trax

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2017 Chevrolet Trax tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2017 Chevrolet Trax tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What are the initial steps to diagnose a tire pressure warning light that stays on in a 2017 Chevrolet Trax?

To effectively diagnose a tire pressure warning light that remains illuminated in your 2017 Chevrolet Trax, begin with the simplest and most accessible solutions. First, manually check the tire pressure in all four tires using a reliable tire pressure gauge, ensuring that each tire is inflated to the manufacturer's recommended levels, typically found on a sticker inside the driver's side door jamb or in the owner's manual. Next, visually inspect each tire for any signs of damage, such as punctures, cuts, or bulges, as these can lead to pressure loss and trigger the warning light. If the tire pressures are correct and no visible damage is found, proceed to reset the tire pressure monitoring system (TPMS) according to the instructions in your vehicle's manual, as this can sometimes resolve the issue. If the warning light persists, it may indicate a malfunctioning tire pressure sensor, which could require professional inspection or replacement. Should these initial steps not yield results, consulting a mechanic or authorized service center is advisable for a comprehensive diagnosis, as they possess the specialized tools necessary to identify and rectify the underlying problem. By following this diagnostic approach, you can systematically address the tire pressure warning light issue and ensure your vehicle's safety and performance.

What could cause the tire pressure warning light to stay on in a 2017 Chevrolet Trax?

When the tire pressure warning light remains illuminated in your 2017 Chevrolet Trax, it can be a source of concern, but understanding the common problems can help you diagnose the issue. One of the primary culprits is low tire pressure, which can easily be checked with a tire pressure gauge. Ensure all tires are inflated to the manufacturer's recommended levels, as even a slight drop can trigger the warning light. If the pressure is adequate, consider the possibility of a faulty tire pressure sensor; these sensors can wear out over time and may need replacement. Additionally, the tire pressure monitoring system itself might malfunction, requiring a reset or recalibration to function correctly. Seasonal temperature changes can also impact tire pressure, so it's wise to adjust accordingly during colder months. Inspecting your tires for leaks or damage is crucial, as punctures can lead to pressure loss. Lastly, if all else fails, electrical issues within the vehicle's system could be at play, necessitating a professional diagnostic check. By systematically addressing these potential problems, you can effectively troubleshoot the tire pressure warning light in your Trax and ensure safe driving conditions.

What should I do if the tire pressure warning light on my 2017 Chevrolet Trax stays on?

When the tire pressure warning light on your 2017 Chevrolet Trax remains illuminated, it signals a critical issue that requires immediate attention. Ignoring this warning can lead to unsafe driving conditions, increased tire wear, and even potential blowouts, which could result in serious accidents. To ensure your safety and the longevity of your vehicle, start by checking the tire pressure in all tires, including the spare. Use a reliable tire pressure gauge to compare the readings against the manufacturer's recommended levels, typically found in the owner's manual or on a sticker inside the driver's side door. If you discover any discrepancies, promptly inflate or deflate the tires to the correct pressure. Additionally, inspect each tire for visible damage such as punctures or bulges, as these can compromise your safety and necessitate repairs or replacements. After making the necessary adjustments, you may need to reset the tire pressure monitoring system, which can usually be done through your vehicle's onboard menu. If the warning light persists despite your efforts, it is crucial to consult a certified mechanic to diagnose any underlying issues with the monitoring system. By taking these steps, you not only enhance your safety on the road but also prevent further damage to your vehicle, making it essential to act swiftly when faced with this warning light.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.