2013 Chevrolet Suburban 2500 Tire Pressure Warning Light Stays On

Tire Pressure Warning Light in 2013 Chevrolet Suburban 2500: Causes and Solutions

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2013 Chevrolet Suburban 2500 tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Chevrolet Suburban 2500 tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue on my 2013 Chevrolet Suburban 2500?

To effectively diagnose the tire pressure warning light issue on your 2013 Chevrolet Suburban 2500, begin with a thorough check of the tire pressure in all tires, including the spare. Utilizing a tire pressure gauge, ensure that each tire is inflated to the recommended levels outlined in your owner's manual, as improper inflation is a common cause of warning lights. Next, conduct a visual inspection of each tire for any signs of damage such as punctures, cuts, or bulges, which could also trigger the warning. If the tire pressures are correct and no visible damage is found, proceed to reset the tire pressure monitoring system (TPMS) if your vehicle allows it; consult the owner's manual for specific reset instructions. Additionally, inspect the TPMS sensors on each tire to confirm they are functioning correctly, as faulty sensors can lead to persistent warning lights. If the warning light remains illuminated after these checks, it may indicate a more complex issue, and seeking assistance from a mechanic or dealership for further diagnosis is advisable. By following this systematic approach, you can effectively address the tire pressure warning light issue and ensure your vehicle's safety and performance.

What could be causing the tire pressure warning light to remain on in a 2013 Chevrolet Suburban 2500?

When the tire pressure warning light stays on in a 2013 Chevrolet Suburban 2500, it can signal various underlying issues that DIYers should investigate. One of the most common reasons is low tire pressure, which can be affected by temperature fluctuations, so it's vital to check the air pressure in all tires, including the spare. If the pressure is correct, the problem may stem from malfunctioning tire pressure sensors, which can fail or become damaged over time. Additionally, if the vehicle has recently been serviced, a tripped sensor might require a reset of the Tire Pressure Monitoring System (TPMS). A blinking warning light could indicate more serious concerns, such as a faulty TPMS sensor or issues with the TPMS module or the vehicle's Electronic Control Unit (ECU). Addressing these issues promptly is essential, as neglecting the warning can lead to severe consequences like tire overheating or failure. Therefore, diagnosing the specific cause and taking appropriate action is crucial for maintaining vehicle safety and performance.

How urgent is it to address the tire pressure warning light on a 2013 Chevrolet Suburban 2500?

Addressing the tire pressure warning light on a 2013 Chevrolet Suburban 2500 is of utmost urgency due to the significant safety risks and potential vehicle damage associated with low tire pressure. When this warning light illuminates, it serves as a critical alert from the Tire Pressure Monitoring System (TPMS) that one or more tires may be underinflated, which can severely impact handling, fuel efficiency, and overall driving safety. Ignoring this warning can lead to uneven tire wear, increased risk of tire blowouts, and compromised vehicle stability, especially during adverse driving conditions. Furthermore, a continuously illuminated light may indicate a more serious issue with the TPMS itself, necessitating immediate attention to prevent further complications. Therefore, it is essential to check and inflate all tires, including the spare, to the manufacturer's recommended levels as soon as the warning light appears. If the light persists after addressing tire pressure, seeking professional diagnosis is crucial to ensure the vehicle remains safe and reliable on the road.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.