The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
If the MAF sensor sends an erroneous signal, a few things happen. The engine's computer will trigger the check engine light, and the on-board diagnostic (OBD) trouble codes will reflect the airflow discrepancy noted by the MAF sensor. Depending on the reported volume of air, the engine may try to compensate for these conditions, causing the engine to burn excessive amounts of fuel and emit black smoke from the exhaust. In this case, the OBD trouble codes would also reference faults recognized by the exhaust oxygen sensors. The engine may also have issues with idling roughly, failing to start, stalling, hesitation, power loss, misfires, and fuel consumption.
A faulty oxygen sensor is one of the most common causes of a check engine light. Symptoms may include a decrease in fuel mileage, hesitation or misfiring from the engine, rough idling or even stalling. A faulty sensor may cause the vehicle to fail an emissions test.
Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.
The most likely symptom of a faulty fuel temperature sensor is a check engine light. When the sensor goes bad, the Engine Control Module signals the driver that there is a problem by turning on the dash light. Poor fuel economy might also be noticed. In some cases, a failing fuel temperature sensor could lead to hard starting of the engine or an engine misfire and poor performance.
When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.
When dealing with engine stalling in a 2016 BMW 640i xDrive Gran Coupe, understanding the urgency of the situation is crucial for both safety and vehicle performance. While stalling can sometimes stem from minor issues, such as a faulty sensor that may be easily replaced, it can also indicate more serious problems that could lead to significant engine damage if left unaddressed. Consistent or intermittent stalling, especially during braking, should not be ignored, as it may suggest underlying mechanical failures that could compromise your safety on the road. Neglecting these symptoms could result in costly repairs down the line, including potential engine rebuilds if critical components like valve stem seals are worn. Therefore, it is advisable to have a qualified mechanic conduct a thorough inspection to accurately diagnose the issue and determine the necessary repairs, ensuring that your vehicle remains safe and reliable.
Read about related problems experienced by other BMW 640i xDrive Gran Coupe drivers like you.
See what others are asking about their BMW 640i xDrive Gran Coupe. Get answers from RepairPal's community of auto experts and enthusiasts.