2019 BMW 440i Gran Coupe Engine Is Stalling

Common Causes of Engine Stalling in Your 2019 BMW 440i Gran Coupe and How to Resolve Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Fuel System
0%
15% chance it's the
Air Intake System
0%
55% chance it's
Something else
The most common reasons a 2019 BMW 440i Gran Coupe engine is stalling are the fuel system, the air intake system, or the ignition system.
  • Fuel System: A clogged fuel filter or failing fuel pump can restrict fuel flow, resulting in poor engine performance and starting issues.
  • Air Intake System: A dirty or damaged air filter or a malfunctioning mass airflow sensor can restrict airflow, leading to reduced engine performance and efficiency.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2019 BMW 440i Gran Coupe engine is stalling?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If the MAF sensor sends an erroneous signal, a few things happen. The engine's computer will trigger the check engine light, and the on-board diagnostic (OBD) trouble codes will reflect the airflow discrepancy noted by the MAF sensor. Depending on the reported volume of air, the engine may try to compensate for these conditions, causing the engine to burn excessive amounts of fuel and emit black smoke from the exhaust. In this case, the OBD trouble codes would also reference faults recognized by the exhaust oxygen sensors. The engine may also have issues with idling roughly, failing to start, stalling, hesitation, power loss, misfires, and fuel consumption.

»MORE: Signs of a failing mass airflow sensor

A faulty oxygen sensor is one of the most common causes of a check engine light. Symptoms may include a decrease in fuel mileage, hesitation or misfiring from the engine, rough idling or even stalling. A faulty sensor may cause the vehicle to fail an emissions test.

Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.

The most likely symptom of a faulty fuel temperature sensor is a check engine light. When the sensor goes bad, the Engine Control Module signals the driver that there is a problem by turning on the dash light. Poor fuel economy might also be noticed. In some cases, a failing fuel temperature sensor could lead to hard starting of the engine or an engine misfire and poor performance.

When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.

What initial diagnostic steps should be taken for a 2019 BMW 440i Gran Coupe experiencing engine stalling?

When addressing engine stalling issues in a 2019 BMW 440i Gran Coupe, it's essential to adopt a systematic diagnostic approach that prioritizes simpler checks before delving into more complex systems. Start by using an OBD-II scanner to retrieve any error codes, as these can quickly highlight specific problems within the vehicle's computer system. Next, inspect the fuel system, focusing on the fuel pump, filter, and injectors for any signs of wear or blockage, as fuel delivery issues are common culprits in stalling scenarios. Following this, examine the ignition system, including spark plugs and ignition coils, since faulty components here can lead to misfires. Additionally, ensure the air intake system is unobstructed, as a dirty air filter can significantly affect engine performance. Don’t overlook the importance of checking various sensors, such as the mass airflow and throttle position sensors, which play critical roles in maintaining the correct air-fuel mixture. Finally, assess the battery and charging system to rule out electrical issues that could contribute to stalling. By methodically working through these steps, you can effectively diagnose and address the stalling issue in your BMW.

What are the common problems that could cause the engine to stall in a 2019 BMW 440i Gran Coupe?

When diagnosing engine stalling issues in a 2019 BMW 440i Gran Coupe, it's essential to consider several common problems that could be at play. Start by examining the fuel system, as a clogged fuel filter or a failing fuel pump can significantly disrupt fuel delivery, leading to stalling. Next, inspect the electrical system, particularly the ignition components and various sensors, since malfunctions here can cause unexpected engine shutdowns. Additionally, check for any blockages or issues within the air intake and exhaust systems, as these can hinder engine performance. Overheating is another critical factor; ensure the cooling system is functioning correctly and that there is adequate coolant to prevent the engine from reaching dangerous temperatures. Lastly, faulty sensors, such as the mass airflow or oxygen sensors, can send incorrect data to the engine control unit, resulting in stalling. By addressing these areas through regular maintenance and timely repairs, you can help ensure your BMW runs smoothly and avoid the frustration of engine stalling.

How urgent is it to address the engine stalling issue in a 2019 BMW 440i Gran Coupe?

Addressing the engine stalling issue in a 2019 BMW 440i Gran Coupe is of utmost urgency due to the serious safety risks it poses. When an engine stalls unexpectedly, it can lead to a sudden loss of power, which is particularly dangerous in high-traffic situations or at elevated speeds. This not only jeopardizes the safety of the driver and passengers but also endangers other road users. Furthermore, neglecting this issue can result in the vehicle becoming inoperable, potentially leaving you stranded and facing costly towing fees. Engine stalling often indicates underlying mechanical or electrical problems that, if left unresolved, may escalate into more severe issues, leading to extensive repairs and increased expenses. Regular maintenance and prompt repairs are essential for the longevity and performance of your vehicle, making it critical to address any stalling symptoms immediately. By taking swift action, you can ensure your BMW remains safe and reliable on the road.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.